Paying attention to your vehicle is important in the present day, in fact, if you do not do the minimum routine service of it, or if you do not take into account signs of abnormality, you strongly risk to see your car becoming unpleasant to use. This is exactly the subject we are going to focus on in this article, one of the symptoms that most disturbs motorists is the key indicator light on Toyota C-hr dash . To try to help you analyze this light, first we will see what this key light on Toyota C-hr points, then in a second how to proceed if the key light is lit on Toyota C-hr? .
What does the key light on Toyota C-hr indicate?
So we start our content with the meaning of a key indicator light on Toyota C-hr dash , it may be that furthermore to the key you have the logo of a car next to it. Take note that the main objective of this light is to inform you that it’s time to service your Toyota C-hr , however, this light can also have other meanings, even dozens of them. To discover the origin of this issue the best solution will be to run your Toyota C-hr through the diagnostic too l, if you don’t know how to do this process, you can find all the required information to perform this action in our dedicated content. We will try in the following list to give you the maximum information on the main warning messages it can send you:
- An oil change done without resetting the indicator: If you have done your oil change by yourself, it is probably that you have not thought of resetting the oil change indicator of your Toyota C-hr, here is the process to do this small reset of the key light of your car.
- Oil level issue: It is possible that the oil level sensor is suggesting that the oil level is too low.
- EGR Valve: Another opportunity is that the key light on your Toyota C-hr is on because your EGR valve is dirty, often the case if you are driving short distances or not pushing the gears of your vehicle.
- Glow plugs: At last, the last and most general trigger of an orange wrench light on Toyota C-hr is that your glow plugs are getting tired.
What if the orange key light on Toyota C-hr is on?
We are now going to move on to the second component of our content and try to present you the solutions to each of the problems described in the previous part and therefore how to proceed if I see the wrench light on your Toyota C-hr? To achieve this, we will take turns answering each of the problems you may face:
- Reset the drain indicator light: As we outlined earlier in this article, a very easy reset of the indicator light on your Toyota C-hr will be enough to turn off the key indicator and restart it for a cycle of 10 000km or 1 year, see our content to perform this process.
- Oil level issue: This is a very basic issue and the easiest to solve. You will just have to examine your oil level, we recommend you to take the opportunity to verify all your oil levels.
- EGR Valve: In the circumstance of a light that comes on due to the EGR valve, you will need to have the details of this fault code through the diagnostic tool. Once you are sure of the origin of the issue, you can try to clean your car by pushing the gears (hot engine), in any other case disassemble and clean the EGR valve of your Toyota C-hr, we done a guide to help you to do it. In any other case, go to a garage and prepare to pay a few hundred euros.
- Glow plugs: Finally, if your issue originates from your glow plugs, the process to replace them is quite very easy and you won’t need more than 40 euros worth of glow plugs.
There, you now know everything about the wrench light on Toyota C-hr , we hope this content has helped you solve your issue.
To discover more tips on the Toyota C-hr, take a look at the Toyota C-hr category.
