Keeping an eye on your car is essential in these modern times, in reality, if you do not do the lowest maintenance of it, or if you do not consider signs of abnormality, you firmly risk to see your motor vehicle becoming unpleasant to use. This is exactly the subject we are going to focus on in this article, one of the indications that most interferes with car owners is the key indicator light on Mitsubishi L200 dash . To try to help you analyze this light, first we will see what this key light on Mitsubishi L200 points, then in a second what to do if the key light is lit on Mitsubishi L200? .
What does the key light on Mitsubishi L200 indicate?
So we start our content with the meaning of a key indicator light on Mitsubishi L200 dash , it may be that in addition to the key you have the logo of a car next to it. Take note that the main function of this light is to inform you that it’s time to service your Mitsubishi L200 , however, this light can also have other meanings, even dozens of them. To discover the source of this problem the best remedy will be to run your Mitsubishi L200 through the diagnostic too l, if you don’t know how to do this procedure, you can discover all the required information to carry out this work in our dedicated content. We will try in the following list to give you the maximum information on the main alert messages it can send you:
- An oil change conducted without resetting the indicator: If you have done your oil change by yourself, it is probably that you have not thought of resetting the oil change indicator of your Mitsubishi L200, here is the procedure to do this small reset of the key light of your car.
- Oil level problem: It is possible that the oil level sensor is indicating that the oil level is too low.
- EGR Valve: Another possibility is that the key light on your Mitsubishi L200 is on because your EGR valve is dirty, frequently the case if you are driving short distances or not pushing the gears of your vehicle.
- Glow plugs: At last, the last and most general trigger of an orange wrench light on Mitsubishi L200 is that your glow plugs are getting tired.
What if the orange key light on Mitsubishi L200 is on?
We are now going to proceed to the second component of our content and try to present you the solutions to each of the complications outlined in the previous part and consequently what to do if I find out the wrench light on your Mitsubishi L200? To do this, we will take turns answering each of the complications you may face:
- Reset the drain indicator light: As we revealed before, a simple reset of the indicator light on your Mitsubishi L200 will be enough to turn off the key indicator and restart it for a cycle of 10 000km or 1 year, see our content to carry out this procedure.
- Oil level problem: This is a very basic problem and the easiest to solve. You will just have to verify your oil level, we recommend you to take the opportunity to check all your oil levels.
- EGR Valve: In the case of a light that comes on due to the EGR valve, you will need to have the points of this fault code through the diagnostic tool. Once you are sure of the source of the problem, you can try to clean your car by pushing the gears (hot engine), otherwise disassemble and clean the EGR valve of your Mitsubishi L200, we made a tutorial to help you to do it. Otherwise, go to a garage and prepare to pay a few hundred euros.
- Glow plugs: Finally, if your problem comes from your glow plugs, the procedure to change them is quite simple and you won’t need more than 40 euros worth of glow plugs.
There, you now know everything about the wrench light on Mitsubishi L200 , we hope this content has helped you solve your problem.
To find more tips on the Mitsubishi L200, take a look at the Mitsubishi L200 category.
