Keeping an eye on your car is essential nowadays, indeed, if you do not do the minimal routine service of it, or if you do not take into account signals of abnormality, you strongly risk to see your motor vehicle becoming unpleasant to use. This is exactly the theme we are going to focus on in this article, one of the signs that most interferes with motorists is the key indicator light on Mazda CX 3 dash . To try to help you analyze this light, first we will see what this key light on Mazda CX 3 means, then in a second how to proceed if the key light is lit on Mazda CX 3? .
What does the key light on Mazda CX 3 mean?
So we start our article with the meaning of a key indicator light on Mazda CX 3 dash , it may be that furthermore to the key you have the logo of a car next to it. Be aware that the most important objective of this light is to tell you that it’s time to service your Mazda CX 3 , nevertheless, this light can also have other meanings, even dozens of them. To discover the source of this issue the best remedy will be to run your Mazda CX 3 through the diagnostic too l, if you don’t know how to get this done procedure, you can locate all the required information to accomplish this action in our dedicated article. We will try in the following list to give you the maximum information on the most important warning messages it can send you:
- An oil change done without resetting the indicator: If you have done your oil change on your own, it is probably that you have not thought of resetting the oil change indicator of your Mazda CX 3, here is the procedure to get this done small reset of the key light of your car.
- Oil level issue: It is possible that the oil level sensor is revealing that the oil level is too low.
- EGR Valve: Another possibility is that the key light on your Mazda CX 3 is on because your EGR valve is dirty, frequently the case if you are driving short distances or not pushing the gears of your vehicle.
- Glow plugs: At last, the last and most basic cause of an orange wrench light on Mazda CX 3 is that your glow plugs are getting tired.
What if the orange key light on Mazda CX 3 is on?
We are now going to proceed to the second part of our article and try to present you the solutions to each of the problems mentioned in the previous part and consequently how to proceed if I discover the wrench light on your Mazda CX 3? To achieve this, we will take turns answering each of the problems you may face:
- Reset the drain indicator light: As we revealed before, a basic reset of the indicator light on your Mazda CX 3 will be enough to turn off the key indicator and restart it for a cycle of 10 000km or 1 year, see our article to accomplish this procedure.
- Oil level issue: This is a very basic issue and the easiest to solve. You will simply have to verify your oil level, we advise you to take the opportunity to verify all your oil levels.
- EGR Valve: In the circumstance of a light that comes on due to the EGR valve, you will need to have the points of this fault code through the diagnostic tool. Once you are sure of the source of the issue, you can try to clean your car by pushing the gears (hot engine), otherwise disassemble and clean the EGR valve of your Mazda CX 3, we done a guide to help you to do it. Otherwise, go to a garage and prepare to pay a few hundred euros.
- Glow plugs: Finally, if your issue originates from your glow plugs, the procedure to change them is quite basic and you won’t need more than 40 euros worth of glow plugs.
There, you now know everything about the wrench light on Mazda CX 3 , we hope this article has helped you solve your issue.
If you wish more tutorials on the Mazda CX 3, go to our Mazda CX 3 category.
