Paying attention to your car is fundamental in these modern times, indeed, if you do not do the lowest maintenance of it, or if you do not take into consideration signs of abnormality, you highly risk to see your car becoming unpleasant to use. This is precisely the subject we are going to discuss today, one of the indications that most interferes with motorists is the key indicator light on Fiat Panda 3 dash . To try to help you analyze this light, first we will see what this key light on Fiat Panda 3 corresponds to, then in a second what to do if the key light is lit on Fiat Panda 3? .
What does the key light on Fiat Panda 3 mean?
So we start our content page with the meaning of a key indicator light on Fiat Panda 3 dash , it may be that furthermore to the key you have the logo of a car next to it. Be aware that the most important objective of this light is to notify you that it’s time to service your Fiat Panda 3 , nevertheless, this light can also have other explanations, even dozens of them. To find the source of this problem the best solution will be to run your Fiat Panda 3 through the diagnostic too l, if you don’t know how to do this procedure, you can discover all the needed info to perform this work in our dedicated content page. We will try in the following list to give you the maximum info on the most important warning information it can send you:
- An oil replace conducted without resetting the indicator: If you have done your oil replace by yourself, it is most likely that you have not thought of resetting the oil change indicator of your Fiat Panda 3, here is the procedure to do this small reset of the key light of your car.
- Oil level problem: It is possible that the oil level sensor is indicating that the oil level is too low.
- EGR Valve: Another possibility is that the key light on your Fiat Panda 3 is on because your EGR valve is dirty, very often the case if you are driving short distances or not pushing the gears of your car.
- Glow plugs: At last, the last and most basic trigger of an orange wrench light on Fiat Panda 3 is that your glow plugs are getting tired.
What if the orange key light on Fiat Panda 3 is on?
We are now going to proceed to the second component of our content page and try to present you the solutions to each of the problems mentioned in the previous part and therefore what to do if I discover the wrench light on your Fiat Panda 3? To do this, we will take turns answering each of the problems you might face:
- Reset the drain indicator light: As we revealed before, a simple reset of the indicator light on your Fiat Panda 3 will be enough to turn off the key indicator and restart it for a cycle of 10 000km or 1 year, see our content page to perform this operation.
- Oil level problem: This is a very basic problem and the easiest to resolve. You will just have to verify your oil level, we recommend you to take the opportunity to verify all your oil levels.
- EGR Valve: In the circumstance of a light that comes on due to the EGR valve, you will need to have the details of this fault code through the diagnostic tool. Once you are sure of the source of the problem, you can try to clean your car by pushing the gears (hot engine), otherwise disassemble and clean the EGR valve of your Fiat Panda 3, we made a guide to help you to do it. Otherwise, go to a mechanic and prepare to pay a few hundred euros.
- Glow plugs: Finally, if your problem comes from your glow plugs, the procedure to replace them is quite simple and you won’t need more than 40 euros worth of glow plugs.
There, you now know everything about the wrench light on Fiat Panda 3 , we hope this content page has helped you solve your problem.
To discover more tips on the Fiat Panda 3, take a look at the Fiat Panda 3 category.
