Keeping an eye on your car is fundamental nowadays, in truth, if you do not do the lowest routine service of it, or if you do not take into account signals of abnormality, you highly risk to see your car becoming unpleasant to use. This is exactly the theme we are going to speak about in this article, one of the symptoms that most disturbs motorists is the key indicator light on Chrysler 300 dash . To try to help you analyze this light, first we will see what this key light on Chrysler 300 corresponds to, then in a second what to do if the key light is lit on Chrysler 300? .

key-light-stays-on-chrysler-300

What does the key light on Chrysler 300 mean?

So we begin our article with the meaning of a key indicator light on Chrysler 300 dash , it may be that in addition to the key you have the logo of a car next to it. Take note that the most important function of this light is to inform you that it’s time to service your Chrysler 300 , nevertheless, this light can also have other explanations, even dozens of them. To discover the origin of this problem the best solution will be to run your Chrysler 300 through the diagnostic too l, if you don’t know how to do this process, you can find all the necessary information to conduct this work in our dedicated article. We will try in the following list to give you the maximum information on the most important warning announcements it can send you:

  • An oil change conducted without resetting the indicator: If you have done your oil change on your own, it is most likely that you have not thought of resetting the oil change indicator of your Chrysler 300, here is the process to do this small reset of the key light of your car.
  • Oil level problem: It is possible that the oil level sensor is indicating that the oil level is too low.
  • EGR Valve: Another opportunity is that the key light on your Chrysler 300 is on because your EGR valve is dirty, frequently the case if you are driving short distances or not pushing the gears of your car.
  • Glow plugs: At last, the last and most general cause of an orange wrench light on Chrysler 300 is that your glow plugs are getting tired.

What if the orange key light on Chrysler 300 is on?

We are now going to move on to the second component of our article and try to present you the solutions to each of the problems outlined in the previous part and consequently what to do if I discover the wrench light on your Chrysler 300? To do this, we will take turns answering each of the problems you may face:

  • Reset the drain indicator light: As we explained previously, a basic reset of the indicator light on your Chrysler 300 will be enough to turn off the key indicator and restart it for a cycle of 10 000km or 1 year, see our article to conduct this process.
  • Oil level problem: This is a very basic problem and the easiest to correct. You will simply have to check your oil level, we suggest you to take the opportunity to check all your oil levels.
  • EGR Valve: In the case of a light that comes on because of the EGR valve, you will need to have the points of this fault code through the diagnostic tool. Once you are sure of the origin of the problem, you can try to clean your car by pushing the gears (hot engine), in any other case disassemble and clean the EGR valve of your Chrysler 300, we done a guide to help you to do it. In any other case, go to a garage and prepare to pay a few hundred euros.
  • Glow plugs: Finally, if your problem originates from your glow plugs, the process to replace them is quite basic and you won’t need more than 40 euros worth of glow plugs.

There, you now know everything about the wrench light on Chrysler 300 , we hope this article has helped you solve your problem.

If you need more tutorials on the Chrysler 300, go to our Chrysler 300 category.