Keeping an eye on your vehicle is necessary in these modern times, in truth, if you do not do the lowest routine service of it, or if you do not consider signals of abnormality, you strongly risk to see your motor vehicle becoming unpleasant to use. This is exactly the theme we are going to focus on in this article, one of the symptoms that most disturbs motorists is the key indicator light on Chrysler 200 dash . To try to help you analyze this light, first we will see what this key light on Chrysler 200 points, then in a second what to do if the key light is lit on Chrysler 200? .
What does the key light on Chrysler 200 mean?
So we begin our content page with the meaning of a key indicator light on Chrysler 200 dash , it may be that furthermore to the key you have the logo of a car next to it. Be aware that the most important function of this light is to notify you that it’s time to service your Chrysler 200 , nevertheless, this light can also have other explanations, even dozens of them. To discover the source of this issue the best solution will be to run your Chrysler 200 through the diagnostic too l, if you don’t know how to get this done procedure, you can discover all the necessary info to carry out this act in our dedicated content page. We will try in the following list to give you the maximum info on the most important warning information it can send you:
- An oil change done without resetting the indicator: If you have done your oil change on your own, it is probably that you have not thought of resetting the oil change indicator of your Chrysler 200, here is the procedure to get this done small reset of the key light of your car.
- Oil level issue: It is possible that the oil level sensor is revealing that the oil level is too low.
- EGR Valve: Another possibility is that the key light on your Chrysler 200 is on because your EGR valve is dirty, often the case if you are driving short distances or not pushing the gears of your car.
- Glow plugs: Finally, the last and most basic cause of an orange wrench light on Chrysler 200 is that your glow plugs are getting tired.
What if the orange key light on Chrysler 200 is on?
We are now going to move on to the second part of our content page and try to present you the solutions to each of the problems outlined in the previous part and therefore what to do if I find out the wrench light on your Chrysler 200? To do this, we will take turns answering each of the problems you might face:
- Reset the drain indicator light: As we outlined earlier in this article, a simple reset of the indicator light on your Chrysler 200 will be enough to turn off the key indicator and restart it for a cycle of 10 000km or 1 year, see our content page to carry out this operation.
- Oil level issue: This is a very basic issue and the easiest to correct. You will simply have to check your oil level, we recommend you to take the opportunity to check all your oil levels.
- EGR Valve: In the case of a light that comes on as a result of the EGR valve, you will need to have the details of this fault code through the diagnostic tool. Once you are sure of the source of the issue, you can try to clean your car by pushing the gears (hot engine), otherwise disassemble and clean the EGR valve of your Chrysler 200, we done a guide to help you to do it. Otherwise, go to a mechanic and prepare to pay a few hundred euros.
- Glow plugs: Finally, if your issue originates from your glow plugs, the procedure to change them is quite simple and you won’t need more than 40 euros worth of glow plugs.
There, you now know everything about the wrench light on Chrysler 200 , we hope this content page has helped you solve your issue.
If you want more tutorials on the Chrysler 200, go to our Chrysler 200 category.
