Do you have the sense of a power drop without any reasonable explanation, and all this happens in an unknown or usual manner? Maybe it’s because your Jeep Liberty is going to limp mode . In truth, the safety mode can be activated on a car for a number of factors and the activation of this mode will set the engine’s behavior, often producing a momentary or irreversible loss of power from your Jeep Liberty until you solve the problem. Our publishers wanted to produce this guidebook so that you can fix this matter, which is very embarrassing and can be dangerous for you and the rest of the car owners. In order to resolve these issues, we will focus on the limp mode of your Jeep Liberty. And secondly, what are the factors why your Jeep Liberty goes into safety mode?


Jeep Liberty THAT GOES TO limp mode: WHAT IS IT?

Let’s begin our article with the definition of your Jeep Liberty that goes to limp mode . You almost certainly won’t have any info about the fact that this mode has been turned on and you will simply experience the outcomes. In most cases the clues of a safety mode on your Jeep Liberty will be that you will detect an identifiable loss of power, you should not be able to exceed 3000 rpm which makes the use of your Jeep Liberty more than complicated. In addition to the power loss, you may have an amber warning light on your speedometer which will appear on the screen to recommend that you go to your auto technician to handle the problem as quickly as possible. In reality, via your vehicle’s ECU and the various sensors that constantly monitor the procedure of your engine, your Jeep Liberty that goes to security is in fact a sort of electronic flange of your engine. However, you must be concerned about this quickly because it almost certainly hides a concern that needs to be dealt with, nevertheless, especially with time, certain elements such as the EGR valve, the catalytic converter or the particle filter will become clogged and will age much more quickly. In some circumstances, simply turning your Jeep Liberty off and on again will be enough to turn off the safety mode, in other cases the original concern must be resolved to return to regular behaviour.

Why is my Jeep Liberty going into limp mode?

Now we’re going to outline the factors why your Jeep Liberty is on limp mode. First of all you can easily verify whether this is the circumstance by using your diagnostic plug and Jeep Libertyreading the fault codes of your Jeep Liberty. Please have a look at our specific content page which teaches you how to use these tools and translate the fault codes of your Jeep Liberty yourself. You should discover a fault code displayed due to an engine component. Based on the finish of your car the on-board computer will as well tell you that you are in safety mode. We will then see most of the parts that can produce your Jeep Liberty safe.

  • Turbo: A faulty turbo will immediately notify your computer and produce your car safe.
  • The EGR valve: If your car is ever used in a really quiet technique or just for short trips at low speed, it will often clog up and cause the safety mode to be activated.
  • The Particle Filter: A part famous for the complications it causes, in the event that your PAP is clogged, you will be subject to a safety shutdown of your Jeep Liberty simply because your engine will not be able to properly exhaust the exhaust gases.
  • The flow meter: At last, the flow meter is the last of the known causes of an Jeep Liberty going into safety. In fact, if it doesn’t manage the air/fuel mixture properly, your ECU will know the problem instantly.

In case you have any other worries or questions about your car, you can certainly locate the solution in our Jeep Liberty Guide.

If perhaps you have any further questions about the Jeep Liberty, do not hesitate to consult our Jeep Liberty category.