Having a issue with your car is common, because regrettably recent automobiles are more and more difficult and consequently exposed to more and more possible breakdowns. On this page we’re going to try to help you to fix an injection problem on your Toyota Tacoma . This is a issue that is especially frustrating because it can ultimately bring your vehicle to non starting or broken engine unit. To get this done, first we will discover how injection works, then, what are the different problems that can exist on a Toyota Tacoma injectors , and at last, how to fix them.
What is the aim of the injection of a Toyota Tacoma?
So we begin our content by promptly detailing how an injection system works so that you have all the info you need to understand the failure connected with it. < br>
The injection system of a Toyota Tacoma manages the fuel intake into the engine unit , it replaces the old carburettors. It has the benefit to be much more precise and to come, under pressure, to discharge the fuel in the engine unit. The injection pump takes care of pressurizing the fuel and transferring it to the injectors, and the injectors will discharge the fuel in the form of micro-drops into the cylinders of your Toyota Tacoma. The benefit of fuel injection is to have a much more precise dosage than a carburettor and to enable a better air/fuel mixture and consequently a better combustion.
What are the different injection problems on Toyota Tacoma?
Now in this second component, we are going to see the different injection problems and their signs of illness that you might encounter on your Toyota Tacoma .
Injection pump problems Toyota Tacoma
To begin, we will discover the injection pump problems on your Toyota Tacoma, there are not many of them, they are often recurrent but we will detail them below:
- Electronic issue of the high pressure pump: If you have an electronic issue, the pressure in your injection system might be too high or too low which will bring about a bad air/fuel mixture and consequently a bad combustion and thus alter the behavior of the engine unit of your Toyota Tacoma.
- Leakage from the injection pump of your Toyota Tacoma: If you have a significant leakage problem, the result will be much the same as if you have a lack of pressure, you will not have enough pressure and consequently the combustion of your fuel will not be good
.
Regarding the consequences and signs of illness of a fuel pump issue on a Toyota Tacoma , you will obviously experience, a lack of power, your engine unit grazing, dark smoke emissions…
Injectors problems Toyota Tacoma
Now we move on to the injector problems on Toyota Tacoma . Injectors represent the end of your injection system, here are the different problems you might encounter:
- Dirty Toyota Tacoma injectors: This can happen due to poor fuel quality, they will let less fuel through or more if they are completely clogged. So you will potentially have one or more cylinders that are not functioning effectively.
- Leaky Toyota Tacoma injector: It’s often at the high pressure seals that an injector can leak, it can also, more rarely, be cracked or broken.
- Injector Toyota Tacoma HS: This is the circumstance when your injectors are completely clogged or when you have an electronic problem, it will not let anything go.
Regarding the signs of illness of injector problems on your Toyota Tacoma it is about the same as for a defective injection pump. You might experience problems with starting, throttle response, power loss, and smoke emission.
How to solve an injection issue on a Toyota Tacoma?
To conclude our article on the injection problems on Toyota Tacoma , we will try to give you the solutions that exist to fix these problems.
If after a precise investigation it’s your injection pump that is the source of your problems, it will regrettably be very difficult to intervene on the problem without replacing the component, this change often goes with the replacement of the injectors, and occasionally the tank, it will take between 2000 and 3000 euros for the whole, try to get several diagnostics and estimates before starting any repair.
Regarding a issue with an injector there are various solutions depending on your concerns, here they are:
- Dirty injector: You can clean the injectors of your Toyota Tacoma, do not hesitate to consult our content on this subject to get the process. If it doesn’t work, you will have to replace them.
- Leaky injector: The change and the purchase of a joint kit will only cost you a few tens of euros, but you still need to have the ability to change it, do not think twice to consult our content on the injectors that leak on Toyota Tacoma, to have all the solutions available to you.
- Injector HS: Finally, last remedy, your injector is broken or doesn’t work anymore, generally speaking, the replacement of an injector costs around 500 euros labor included.
To discover more tips on the Toyota Tacoma, take a look at the Toyota Tacoma category.
