Having a problem with your motor vehicle is basic, because sadly recent vehicles are more and more difficult and consequently be subject to more and more possible breakdowns. In this article we’re going to try to help you to solve an injection problem on your Suzuki Alto . This is a problem that is specially bothersome because it can ultimately bring your car to non starting or damaged engine unit. To get this done, first we will discover how injection works, then, what are the different problems that can exist on a Suzuki Alto injectors , and at last, how to solve them.
What is the goal of the injection of a Suzuki Alto?
So we commence our content by promptly explaining how an injection system works so that you have all the info you need to discover the failures associated with it. < br>
The injection system of a Suzuki Alto handles the fuel intake into the engine unit , it replaces the old carburettors. It has the benefit to be a lot more precise and to come, under pressure, to discharge the fuel in the engine unit. The injection pump takes care of pressurizing the fuel and transferring it to the injectors, and the injectors will relieve the fuel in the form of micro-drops into the cylinders of your Suzuki Alto. The benefit of fuel injection is to have a much more precise dosage than a carburettor and to allow a better air/fuel mixture and consequently a better combustion.
What are the different injection problems on Suzuki Alto?
Now in this second component, we are going to see the different injection problems and their signs of illness that you might face on your Suzuki Alto .
Injection pump problems Suzuki Alto
To start, we will discover the injection pump problems on your Suzuki Alto, there are not many of them, they are quite often persistent but we will highlight them below:
- Electronic problem of the high pressure pump: If you have an electronic problem, the pressure in your injection system might be too high or too low which will bring about a bad air/fuel mixture and consequently a bad combustion and thus alter the behavior of the engine unit of your Suzuki Alto.
- Leakage from the injection pump of your Suzuki Alto: If you have a significant leakage problem, the end result will be much the same as if you have a lack of pressure, you will not have enough pressure and consequently the combustion of your fuel will not be good
.
Concerning the outcomes and signs of illness of a fuel pump problem on a Suzuki Alto , you will undoubtedly experience, a lack of power, your engine unit grazing, dark smoke emissions…
Injectors problems Suzuki Alto
Now we move on to the injector problems on Suzuki Alto . Injectors represent the end of your injection system, here are the different problems you might encounter:
- Dirty Suzuki Alto injectors: This can happen due to poor fuel quality, they will let less fuel through or more if they are entirely clogged. So you will probably have one or more cylinders that are not working properly.
- Leaky Suzuki Alto injector: It’s quite often at the high pressure seals that an injector can leak, it can also, more rarely, be cracked or broken.
- Injector Suzuki Alto HS: This is the case when your injectors are entirely clogged or when you have an electronic problem, it will not let anything go.
Concerning the symptoms of injector problems on your Suzuki Alto it is about the same as for a defective injection pump. You might encounter problems with starting, throttle response, power loss, and smoke emission.
How to resolve an injection problem on a Suzuki Alto?
To finish our article on the injection problems on Suzuki Alto , we will try to give you the solutions that exist to solve these problems.
If after a precise diagnosis it’s your injection pump that is the cause of your problems, it will sadly be very difficult to intervene on the problem without changing the component, this change quite often goes with the replacement of the injectors, and occasionally the tank, it will take between 2000 and 3000 euros for the whole, try to get several diagnostics and estimates before starting any repair.
Concerning a problem with an injector there are different solutions depending on your concerns, here they are:
- Dirty injector: You can clean the injectors of your Suzuki Alto, do not think twice to consult our content on this subject to get the process. If it doesn’t work, you will have to replace them.
- Leaky injector: The change and the purchase of a joint kit will only cost you a few tens of euros, but you still need to be able to change it, do not think twice to consult our content on the injectors that leak on Suzuki Alto, to have all the solutions available to you.
- Injector HS: Finally, last solution, your injector is damaged or doesn’t work anymore, generally speaking, the replacement of an injector costs around 500 euros labor included.
To get more tips on the Suzuki Alto, take a look at the Suzuki Alto category.
