Having a issue with your car is traditional, because regrettably recent vehicles are more and more complex and therefore be subject to more and more possible breakdowns. In this article we’re going to try to help you to resolve an injection problem on your Renault Kangoo 2 . This is a issue that is especially bothersome because it can ultimately bring your car to non starting or broken engine. To get this done, first we will see how injection works, then, what are the different concerns that can exist on a Renault Kangoo 2 injectors , and finally, how to resolve them.
What is the intent of the injection of a Renault Kangoo 2?
So we commence our content page by quickly explaining how an injection system works so that you have all the information you need to figure out the failure associated with it. < br>
The injection system of a Renault Kangoo 2 handles the fuel intake into the engine , it replaces the old carburettors. It has the advantage to be far more precise and to come, under pressure, to release the fuel in the engine. The injection pump takes care of pressurizing the fuel and transferring it to the injectors, and the injectors will discharge the fuel in the form of micro-drops into the cylinders of your Renault Kangoo 2. The advantage of fuel injection is to have a much more precise dosage than a carburettor and to enable a better air/fuel mixture and therefore a better combustion.
What are the different injection problems on Renault Kangoo 2?
Now in this second part, we are going to discover the different injection problems and their signs of illness that you may confront on your Renault Kangoo 2 .
Injection pump problems Renault Kangoo 2
To commence, we will see the injection pump problems on your Renault Kangoo 2, there are not many of them, they are quite often frequent but we will highlight them down below:
- Electronic issue of the high pressure pump: If you have an electronic issue, the pressure in your injection system might be too high or too low which will cause a bad air/fuel mixture and therefore a bad combustion and thus alter the performance of the engine of your Renault Kangoo 2.
- Leakage from the injection pump of your Renault Kangoo 2: If you have a major leakage problem, the end result will be much the same as if you have a lack of pressure, you will not have enough pressure and therefore the combustion of your fuel will not be good
.
Concerning the results and signs of illness of a fuel pump issue on a Renault Kangoo 2 , you will most certainly experience, a lack of power, your engine grazing, dark smoke emissions…
Injectors problems Renault Kangoo 2
Now we move on to the injector problems on Renault Kangoo 2 . Injectors represent the end of your injection system, here are the different problems you may encounter:
- Dirty Renault Kangoo 2 injectors: This can happen as a result of poor fuel quality, they will let less fuel through or more if they are entirely clogged. So you will probably have one or more cylinders that are not working effectively.
- Leaky Renault Kangoo 2 injector: It’s quite often at the high pressure seals that an injector can leak, it can also, more rarely, be cracked or broken.
- Injector Renault Kangoo 2 HS: This is the case when your injectors are entirely clogged or when you have an electronic problem, it will not let anything go.
Regarding the signs of illness of injector problems on your Renault Kangoo 2 it is about the same as for a faulty injection pump. You may experience problems with starting, throttle response, power loss, and smoke emission.
How to get rid of an injection issue on a Renault Kangoo 2?
To end our article on the injection problems on Renault Kangoo 2 , we will try to give you the solutions that exist to resolve these problems.
If after a precise investigation it’s your injection pump that is the main cause of your problems, it will regrettably be very complicated to intervene on the trouble without replacing the part, this change quite often goes with the replacement of the injectors, and occasionally the tank, it will take between 2000 and 3000 euros for the whole, try to get some diagnostics and estimates before starting any repair.
Concerning a issue with an injector there are various solutions depending on your concerns, here they are:
- Dirty injector: You can clean the injectors of your Renault Kangoo 2, do not hesitate to consult our content page on this subject to get the procedure. If it doesn’t work, you will have to change them.
- Leaky injector: The change and the purchase of a joint kit will only cost you a few tens of euros, but you still need to have the ability to change it, do not think twice to consult our content page on the injectors that leak on Renault Kangoo 2, to have all the solutions available to you.
- Injector HS: Finally, last remedy, your injector is damaged or doesn’t work anymore, generally speaking, the replacement of an injector costs around 500 euros labor included.
To discover more tips on the Renault Kangoo 2, take a look at the Renault Kangoo 2 category.
