Having a issue with your car is traditional, because regrettably recent vehicles are more and more complex and therefore exposed to more and more possible breakdowns. Today we’re going to try to help you to fix an injection problem on your Peugeot Boxer 2 . This is a issue that is specially frustrating because it can sooner or later bring your vehicle to non starting or damaged engine. To get this done, first we will find out how injection works, then, what are the different concerns that can exist on a Peugeot Boxer 2 injectors , and finally, how to fix them.

injection-problem-peugeot-boxer-2

What is the purpose of the injection of a Peugeot Boxer 2?

So we commence our content by promptly explaining how an injection system works so that you have all the info you need to figure out the failures associated with it. < br>
The injection system of a Peugeot Boxer 2 controls the fuel intake into the engine , it replaces the old carburettors. It has the benefit to be far more precise and to come, under pressure, to launch the fuel in the engine. The injection pump takes care of pressurizing the fuel and transferring it to the injectors, and the injectors will release the fuel in the form of micro-drops into the cylinders of your Peugeot Boxer 2. The benefit of fuel injection is to have a much more precise dosage than a carburettor and to enable a better air/fuel mixture and therefore a better combustion.

What are the different injection complications on Peugeot Boxer 2?

Now in this second component, we are going to see the different injection complications and their signs of illness that you might come across on your Peugeot Boxer 2 .

Injection pump complications Peugeot Boxer 2

To begin, we will find out the injection pump complications on your Peugeot Boxer 2, there are not many of them, they are generally chronic but we will highlight them below:

  • Electronic issue of the high pressure pump: If you have an electronic issue, the pressure in your injection system may be too high or too low which will bring about a bad air/fuel mixture and therefore a bad combustion and thus alter the performance of the engine of your Peugeot Boxer 2.
  • Leakage from the injection pump of your Peugeot Boxer 2: If you have a significant leakage problem, the result will be much the same as if you have a lack of pressure, you will not have enough pressure and therefore the combustion of your fuel will not be good

.
Regarding the outcomes and signs of illness of a fuel pump issue on a Peugeot Boxer 2 , you will obviously experience, a lack of power, your engine grazing, dark smoke emissions…

Injectors complications Peugeot Boxer 2

Now we proceed to the injector problems on Peugeot Boxer 2 . Injectors are the end of your injection system, here are the different complications you might encounter:

  • Dirty Peugeot Boxer 2 injectors: This can happen due to poor fuel quality, they will let less fuel through or more if they are completely clogged. So you will potentially have one or more cylinders that are not functioning properly.
  • Leaky Peugeot Boxer 2 injector: It’s generally at the high pressure seals that an injector can leak, it can also, more rarely, be cracked or broken.
  • Injector Peugeot Boxer 2 HS: This is the circumstance when your injectors are completely clogged or when you have an electronic problem, it will not let anything go.

Concerning the signs of illness of injector complications on your Peugeot Boxer 2 it is about the same as for a defective injection pump. You might experience problems with starting, throttle response, power loss, and smoke emission.

How to solve an injection issue on a Peugeot Boxer 2?

To conclude our article content on the injection complications on Peugeot Boxer 2 , we will try to give you the solutions that exist to fix these complications.
If after a precise investigation it’s your injection pump that is the cause of your complications, it will regrettably be very difficult to intervene on the issue without replacing the component, this change generally goes with the replacement of the injectors, and occasionally the tank, it will take between 2000 and 3000 euros for the whole, try to get several diagnostics and estimates before starting any repair.
Regarding a issue with an injector there are different solutions depending on your concerns, here they are:

  • Dirty injector: You can clean the injectors of your Peugeot Boxer 2, do not hesitate to seek advice from our content on this subject to get the procedure. If it doesn’t work, you will have to change them.
  • Leaky injector: The replace and the purchase of a joint kit will only cost you a few tens of euros, but you still need to be able to replace it, do not think twice to seek advice from our content on the injectors that leak on Peugeot Boxer 2, to have all the solutions available to you.
  • Injector HS: Finally, last remedy, your injector is broken or doesn’t work anymore, generally speaking, the replacement of an injector costs around 500 euros labor included.

To discover more tips on the Peugeot Boxer 2, take a look at the Peugeot Boxer 2 category.