Having a issue with your car is common, because regrettably recent automobiles are more and more difficult and therefore at the mercy of more and more possible breakdowns. In this article we’re going to try to help you to solve an injection problem on your Mitsubishi Pajero 3 . This is a issue that is specially irritating because it can eventually bring your vehicle to non starting or damaged engine. To get this done, first we will see how injection functions, then, what are the different problems that can exist on a Mitsubishi Pajero 3 injectors , and at last, how to solve them.

injection-problem-mitsubishi-pajero-3

What is the goal of the injection of a Mitsubishi Pajero 3?

So we commence our content page by quickly explaining how an injection system functions so that you have all the information you need to understand the failures connected with it. < br>
The injection system of a Mitsubishi Pajero 3 controls the fuel intake into the engine , it replaces the old carburettors. It has the benefit to be much more precise and to come, under pressure, to release the fuel in the engine. The injection pump takes care of pressurizing the fuel and transferring it to the injectors, and the injectors will release the fuel in the form of micro-drops into the cylinders of your Mitsubishi Pajero 3. The benefit of fuel injection is to have a much more precise dosage than a carburettor and to enable a better air/fuel mixture and therefore a better combustion.

What are the different injection problems on Mitsubishi Pajero 3?

Now in this second part, we are going to explore the different injection problems and their manifestations that you might face on your Mitsubishi Pajero 3 .

Injection pump problems Mitsubishi Pajero 3

To commence, we will see the injection pump problems on your Mitsubishi Pajero 3, there are not many of them, they are often frequent but we will detail them down below:

  • Electronic issue of the high pressure pump: If you have an electronic issue, the pressure in your injection system may be too high or too low which will bring about a bad air/fuel mixture and therefore a bad combustion and thus alter the performance of the engine of your Mitsubishi Pajero 3.
  • Leakage from the injection pump of your Mitsubishi Pajero 3: If you have a significant leakage problem, the end result will be much the same as if you have a lack of pressure, you will not have enough pressure and therefore the combustion of your fuel will not be good

.
Concerning the consequences and manifestations of a fuel pump issue on a Mitsubishi Pajero 3 , you will undoubtedly feel, a lack of power, your engine grazing, dark smoke emissions…

Injectors problems Mitsubishi Pajero 3

Now we move on to the injector problems on Mitsubishi Pajero 3 . Injectors are the end of your injection system, here are the different problems you might encounter:

  • Dirty Mitsubishi Pajero 3 injectors: This can happen because of poor fuel quality, they will let less fuel through or more if they are entirely clogged. So you will possibly have one or more cylinders that are not functioning effectively.
  • Leaky Mitsubishi Pajero 3 injector: It’s often at the high pressure seals that an injector can leak, it can also, more rarely, be cracked or broken.
  • Injector Mitsubishi Pajero 3 HS: This is the circumstance when your injectors are entirely clogged or when you have an electronic problem, it will not let anything go.

Concerning the signs of illness of injector problems on your Mitsubishi Pajero 3 it is about the same as for a defective injection pump. You might encounter problems with starting, throttle response, power loss, and smoke emission.

How to resolve an injection issue on a Mitsubishi Pajero 3?

To conclude our content page on the injection problems on Mitsubishi Pajero 3 , we will try to give you the solutions that exist to solve these problems.
If after a precise analysis it’s your injection pump that is the source of your problems, it will regrettably be very difficult to intervene on the trouble without replacing the part, this change often goes with the replacement of the injectors, and occasionally the tank, it will take between 2000 and 3000 euros for the whole, try to get several diagnostics and estimates before starting any repair.
Concerning a issue with an injector there are different solutions based on your concerns, here they are:

  • Dirty injector: You can clean the injectors of your Mitsubishi Pajero 3, do not think twice to seek advice from our content page on this subject to get the process. If it doesn’t work, you will have to change them.
  • Leaky injector: The change and the purchase of a joint kit will only cost you a few tens of euros, but you still need to be able to change it, do not hesitate to seek advice from our content page on the injectors that leak on Mitsubishi Pajero 3, to have all the solutions available to you.
  • Injector HS: Finally, last solution, your injector is broken or doesn’t work anymore, generally, the replacement of an injector costs around 500 euros labor included.

To discover more tips on the Mitsubishi Pajero 3, take a look at the Mitsubishi Pajero 3 category.