Having a problem with your motor vehicle is traditional, because regrettably recent automobiles are more and more difficult and consequently subject to more and more possible breakdowns. In this article we’re going to try to help you to solve an injection problem on your Mitsubishi Asx . This is a problem that is particularly frustrating because it can sooner or later bring your car to non starting or broken engine. To achieve this, first we will discover how injection works, then, what are the different concerns that can exist on a Mitsubishi Asx injectors , and at last, how to solve them.

injection-problem-mitsubishi-asx

What is the intent of the injection of a Mitsubishi Asx?

So we commence our content by promptly explaining how an injection system works so that you have all the info you need to discover the failures associated with it. < br>
The injection system of a Mitsubishi Asx handles the fuel intake into the engine , it replaces the old carburettors. It has the benefit to be a lot more precise and to come, under pressure, to launch the fuel in the engine. The injection pump takes care of pressurizing the fuel and transferring it to the injectors, and the injectors will release the fuel in the form of micro-drops into the cylinders of your Mitsubishi Asx. The benefit of fuel injection is to have a much more precise dosage than a carburettor and to enable a better air/fuel mixture and consequently a better combustion.

What are the different injection complications on Mitsubishi Asx?

Now in this second part, we are going to discover the different injection complications and their signs of illness that you may possibly come across on your Mitsubishi Asx .

Injection pump complications Mitsubishi Asx

To commence, we will discover the injection pump complications on your Mitsubishi Asx, there are not many of them, they are quite often chronic but we will highlight them below:

  • Electronic problem of the high pressure pump: If you have an electronic problem, the pressure in your injection system might be too high or too low which will bring about a bad air/fuel mixture and consequently a bad combustion and thus alter the performance of the engine of your Mitsubishi Asx.
  • Leakage from the injection pump of your Mitsubishi Asx: If you have a major leakage problem, the end result will be much the same as if you have a lack of pressure, you will not have enough pressure and consequently the combustion of your fuel will not be good

.
Concerning the consequences and signs of illness of a fuel pump problem on a Mitsubishi Asx , you will most certainly feel, a lack of power, your engine grazing, dark smoke emissions…

Injectors complications Mitsubishi Asx

Now we proceed to the injector problems on Mitsubishi Asx . Injectors are the end of your injection system, here are the different complications you may possibly encounter:

  • Dirty Mitsubishi Asx injectors: This can happen because of poor fuel quality, they will let less fuel through or more if they are entirely clogged. So you will probably have one or more cylinders that are not functioning properly.
  • Leaky Mitsubishi Asx injector: It’s quite often at the high pressure seals that an injector can leak, it can also, more rarely, be cracked or broken.
  • Injector Mitsubishi Asx HS: This is the case when your injectors are entirely clogged or when you have an electronic problem, it will not let anything go.

Regarding the signs of illness of injector complications on your Mitsubishi Asx it is about the same as for a faulty injection pump. You may possibly encounter problems with starting, throttle response, power loss, and smoke emission.

How to get rid of an injection problem on a Mitsubishi Asx?

To finish our content page on the injection complications on Mitsubishi Asx , we will try to give you the solutions that exist to solve these complications.
If after a precise analysis it’s your injection pump that is the cause of your complications, it will regrettably be very complicated to intervene on the problem without replacing the part, this change quite often goes with the replacement of the injectors, and in some cases the tank, it will take between 2000 and 3000 euros for the whole, try to get some diagnostics and estimates before starting any repair.
Concerning a problem with an injector there are various solutions depending on your concerns, here they are:

  • Dirty injector: You can clean the injectors of your Mitsubishi Asx, do not hesitate to seek advice from our content on this subject to get the process. If it doesn’t work, you will have to change them.
  • Leaky injector: The change and the purchase of a joint kit will only cost you a few tens of euros, but you still need to have the ability to change it, do not hesitate to seek advice from our content on the injectors that leak on Mitsubishi Asx, to have all the solutions available to you.
  • Injector HS: Finally, last remedy, your injector is broken or doesn’t work anymore, in general, the replacement of an injector costs around 500 euros labor included.

If you have any further questions about the Mitsubishi Asx, do not hesitate to consult our Mitsubishi Asx category.