Having a issue with your car is traditional, because unfortunately recent vehicles are more and more difficult and therefore subject to more and more possible breakdowns. On this page we’re going to try to help you to resolve an injection problem on your Mini Mini . This is a issue that is particularly annoying because it can sooner or later bring your vehicle to non starting or broken engine. To get this done, first we will see how injection works, then, what are the different concerns that can exist on a Mini Mini injectors , and finally, how to resolve them.

injection-problem-mini-mini

What is the intent of the injection of a Mini Mini?

So we begin our content by quickly explaining how an injection system works so that you have all the info you need to understand the failures connected with it. < br>
The injection system of a Mini Mini controls the fuel intake into the engine , it replaces the old carburettors. It has the benefit to be a lot more precise and to come, under pressure, to release the fuel in the engine. The injection pump takes care of pressurizing the fuel and transferring it to the injectors, and the injectors will release the fuel in the form of micro-drops into the cylinders of your Mini Mini. The benefit of fuel injection is to have a much more precise dosage than a carburettor and to allow a better air/fuel mixture and therefore a better combustion.

What are the different injection complications on Mini Mini?

Now in this second component, we are going to explore the different injection complications and their manifestations that you might encounter on your Mini Mini .

Injection pump complications Mini Mini

To commence, we will see the injection pump complications on your Mini Mini, there are not many of them, they are generally chronic but we will highlight them below:

  • Electronic issue of the high pressure pump: If you have an electronic issue, the pressure in your injection system may be too high or too low which will trigger a bad air/fuel mixture and therefore a bad combustion and thus alter the performance of the engine of your Mini Mini.
  • Leakage from the injection pump of your Mini Mini: If you have a significant leakage problem, the end result will be much the same as if you have a lack of pressure, you will not have enough pressure and therefore the combustion of your fuel will not be good

.
Regarding the outcomes and manifestations of a fuel pump issue on a Mini Mini , you will most certainly experience, a lack of power, your engine grazing, dark smoke emissions…

Injectors complications Mini Mini

Now we proceed to the injector problems on Mini Mini . Injectors are the end of your injection system, here are the different complications you might encounter:

  • Dirty Mini Mini injectors: This can happen due to poor fuel quality, they will let less fuel through or more if they are entirely clogged. So you will possibly have one or more cylinders that are not functioning properly.
  • Leaky Mini Mini injector: It’s generally at the high pressure seals that an injector can leak, it can also, more rarely, be cracked or broken.
  • Injector Mini Mini HS: This is the case when your injectors are entirely clogged or when you have an electronic problem, it will not let anything go.

Concerning the symptoms of injector complications on your Mini Mini it is about the same as for a faulty injection pump. You might encounter problems with starting, throttle response, power loss, and smoke emission.

How to get rid of an injection issue on a Mini Mini?

To end our content page on the injection complications on Mini Mini , we will try to give you the solutions that exist to resolve these complications.
If after a precise investigation it’s your injection pump that is the cause of your complications, it will unfortunately be very complicated to intervene on the problem without replacing the component, this change generally goes with the replacement of the injectors, and occasionally the tank, it will take between 2000 and 3000 euros for the whole, try to get some diagnostics and estimates before starting any repair.
Regarding a issue with an injector there are various solutions based on your concerns, here they are:

  • Dirty injector: You can clean the injectors of your Mini Mini, do not think twice to consult our content on this subject to get the procedure. If it doesn’t work, you will have to change them.
  • Leaky injector: The change and the purchase of a joint kit will only cost you a few tens of euros, but you still need to have the ability to change it, do not hesitate to consult our content on the injectors that leak on Mini Mini, to have all the solutions available to you.
  • Injector HS: Finally, last solution, your injector is broken or doesn’t work anymore, in general, the replacement of an injector costs around 500 euros labor included.

To find more tips on the Mini Mini, take a look at the Mini Mini category.