Having a problem with your car is common, because sadly recent automobiles are more and more complex and consequently at the mercy of more and more possible breakdowns. Today we’re going to try to help you to fix an injection problem on your Mazda 3 . This is a problem that is particularly irritating because it can ultimately bring your car to non starting or damaged engine. To do this, first we will see how injection works, then, what are the different concerns that can exist on a Mazda 3 injectors , and at last, how to fix them.

injection-problem-mazda-3

What is the purpose of the injection of a Mazda 3?

So we start our content by promptly detailing how an injection system works so that you have all the info you need to figure out the failures affiliated with it. < br>
The injection system of a Mazda 3 manages the fuel intake into the engine , it replaces the old carburettors. It has the benefit to be far more precise and to come, under pressure, to release the fuel in the engine. The injection pump takes care of pressurizing the fuel and transferring it to the injectors, and the injectors will discharge the fuel in the form of micro-drops into the cylinders of your Mazda 3. The benefit of fuel injection is to have a much more precise dosage than a carburettor and to allow a better air/fuel mixture and consequently a better combustion.

What are the different injection problems on Mazda 3?

Now in this second component, we are going to see the different injection problems and their manifestations that you may possibly encounter on your Mazda 3 .

Injection pump problems Mazda 3

To begin, we will see the injection pump problems on your Mazda 3, there are not many of them, they are often chronic but we will highlight them down below:

  • Electronic problem of the high pressure pump: If you have an electronic problem, the pressure in your injection system may be too high or too low which will cause a bad air/fuel mixture and consequently a bad combustion and thus alter the behavior of the engine of your Mazda 3.
  • Leakage from the injection pump of your Mazda 3: If you have a major leakage problem, the consequence will be much the same as if you have a lack of pressure, you will not have enough pressure and consequently the combustion of your fuel will not be good

.
Concerning the results and manifestations of a fuel pump problem on a Mazda 3 , you will obviously experience, a lack of power, your engine grazing, dark smoke emissions…

Injectors problems Mazda 3

Now we proceed to the injector problems on Mazda 3 . Injectors are the end of your injection system, here are the different problems you may possibly encounter:

  • Dirty Mazda 3 injectors: This can happen as a result of poor fuel quality, they will let less fuel through or more if they are completely clogged. So you will possibly have one or more cylinders that are not functioning effectively.
  • Leaky Mazda 3 injector: It’s often at the high pressure seals that an injector can leak, it can also, more rarely, be cracked or broken.
  • Injector Mazda 3 HS: This is the circumstance when your injectors are completely clogged or when you have an electronic problem, it will not let anything go.

Concerning the signs of illness of injector problems on your Mazda 3 it is about the same as for a defective injection pump. You may possibly experience problems with starting, throttle response, power loss, and smoke emission.

How to solve an injection problem on a Mazda 3?

To end our article on the injection problems on Mazda 3 , we will try to give you the solutions that exist to fix these problems.
If after a precise analysis it’s your injection pump that is the main cause of your problems, it will sadly be very complicated to intervene on the trouble without replacing the component, this change often goes with the replacement of the injectors, and in some cases the tank, it will take between 2000 and 3000 euros for the whole, try to get some diagnostics and estimates before starting any repair.
Concerning a problem with an injector there are various solutions depending on your concerns, here they are:

  • Dirty injector: You can clean the injectors of your Mazda 3, do not hesitate to seek advice from our content on this subject to get the procedure. If it doesn’t work, you will have to change them.
  • Leaky injector: The replace and the purchase of a joint kit will only cost you a few tens of euros, but you still need to have the ability to replace it, do not hesitate to seek advice from our content on the injectors that leak on Mazda 3, to have all the solutions available to you.
  • Injector HS: Finally, last remedy, your injector is damaged or doesn’t work anymore, generally, the replacement of an injector costs around 500 euros labor included.

If you want more tutorials on the Mazda 3, go to our Mazda 3 category.