Having a problem with your motor vehicle is traditional, because regrettably recent automobiles are more and more difficult and therefore at the mercy of more and more possible breakdowns. In this article we’re going to try to help you to fix an injection problem on your Hyundai Bayon . This is a problem that is especially frustrating because it can sooner or later bring your vehicle to non starting or damaged engine unit. To do this, first we will see how injection works, then, what are the different concerns that can exist on a Hyundai Bayon injectors , and at last, how to fix them.
What is the aim of the injection of a Hyundai Bayon?
So we commence our article by quickly detailing how an injection system works so that you have all the info you need to discover the failures connected with it. < br>
The injection system of a Hyundai Bayon controls the fuel intake into the engine unit , it replaces the old carburettors. It has the benefit to be a lot more precise and to come, under pressure, to launch the fuel in the engine unit. The injection pump takes care of pressurizing the fuel and transferring it to the injectors, and the injectors will release the fuel in the form of micro-drops into the cylinders of your Hyundai Bayon. The benefit of fuel injection is to have a much more precise dosage than a carburettor and to allow a better air/fuel mixture and therefore a better combustion.
What are the different injection complications on Hyundai Bayon?
Now in this second component, we are going to see the different injection complications and their signs of illness that you may possibly confront on your Hyundai Bayon .
Injection pump complications Hyundai Bayon
To begin, we will see the injection pump complications on your Hyundai Bayon, there are not many of them, they are generally frequent but we will detail them below:
- Electronic problem of the high pressure pump: If you have an electronic problem, the pressure in your injection system might be too high or too low which will bring about a bad air/fuel mixture and therefore a bad combustion and thus alter the performance of the engine unit of your Hyundai Bayon.
- Leakage from the injection pump of your Hyundai Bayon: If you have a significant leakage problem, the result will be much the same as if you have a lack of pressure, you will not have enough pressure and therefore the combustion of your fuel will not be good
.
Concerning the outcomes and signs of illness of a fuel pump problem on a Hyundai Bayon , you will most certainly experience, a lack of power, your engine unit grazing, dark smoke emissions…
Injectors complications Hyundai Bayon
Now we move on to the injector problems on Hyundai Bayon . Injectors represent the end of your injection system, here are the different complications you may possibly encounter:
- Dirty Hyundai Bayon injectors: This can happen as a result of poor fuel quality, they will let less fuel through or more if they are entirely clogged. So you will possibly have one or more cylinders that are not functioning effectively.
- Leaky Hyundai Bayon injector: It’s generally at the high pressure seals that an injector can leak, it can also, more rarely, be cracked or broken.
- Injector Hyundai Bayon HS: This is the case when your injectors are entirely clogged or when you have an electronic problem, it will not let anything go.
Concerning the symptoms of injector complications on your Hyundai Bayon it is about the same as for a faulty injection pump. You may possibly encounter problems with starting, throttle response, power loss, and smoke emission.
How to resolve an injection problem on a Hyundai Bayon?
To finish our content on the injection complications on Hyundai Bayon , we will try to give you the solutions that exist to fix these complications.
If after a precise investigation it’s your injection pump that is the reason of your complications, it will regrettably be very complicated to intervene on the trouble without changing the component, this change generally goes with the replacement of the injectors, and in some cases the tank, it will take between 2000 and 3000 euros for the whole, try to get several diagnostics and estimates before starting any repair.
Concerning a problem with an injector there are various solutions depending on your concerns, here they are:
- Dirty injector: You can clean the injectors of your Hyundai Bayon, do not hesitate to consult our article on this subject to get the process. If it doesn’t work, you will have to change them.
- Leaky injector: The change and the purchase of a joint kit will only cost you a few tens of euros, but you still need to be able to change it, do not think twice to consult our article on the injectors that leak on Hyundai Bayon, to have all the solutions available to you.
- Injector HS: Finally, last remedy, your injector is broken or doesn’t work anymore, generally, the replacement of an injector costs around 500 euros labor included.
If you have any additional questions about the Hyundai Bayon, do not hesitate to consult our Hyundai Bayon category.
