Having a problem with your car is common, because unfortunately recent automobiles are more and more difficult and therefore at the mercy of more and more possible breakdowns. In this article we’re going to try to help you to resolve an injection problem on your Honda E . This is a problem that is specially bothersome because it can eventually bring your vehicle to non starting or damaged engine. To do this, first we will find out how injection functions, then, what are the different concerns that can exist on a Honda E injectors , and finally, how to resolve them.
What is the purpose of the injection of a Honda E?
So we start our content by promptly detailing how an injection system functions so that you have all the information you need to discover the failure affiliated with it. < br>
The injection system of a Honda E handles the fuel intake into the engine , it replaces the old carburettors. It has the benefit to be far more precise and to come, under pressure, to release the fuel in the engine. The injection pump takes care of pressurizing the fuel and transferring it to the injectors, and the injectors will release the fuel in the form of micro-drops into the cylinders of your Honda E. The benefit of fuel injection is to have a much more precise dosage than a carburettor and to enable a better air/fuel mixture and therefore a better combustion.
What are the different injection problems on Honda E?
Now in this second component, we are going to discover the different injection problems and their manifestations that you may encounter on your Honda E .
Injection pump problems Honda E
To start, we will find out the injection pump problems on your Honda E, there are not many of them, they are quite often chronic but we will detail them down below:
- Electronic problem of the high pressure pump: If you have an electronic problem, the pressure in your injection system might be too high or too low which will bring about a bad air/fuel mixture and therefore a bad combustion and thus alter the behavior of the engine of your Honda E.
- Leakage from the injection pump of your Honda E: If you have a significant leakage problem, the end result will be much the same as if you have a lack of pressure, you will not have enough pressure and therefore the combustion of your fuel will not be good
.
Regarding the outcomes and manifestations of a fuel pump problem on a Honda E , you will most certainly feel, a lack of power, your engine grazing, dark smoke emissions…
Injectors problems Honda E
Now we move on to the injector problems on Honda E . Injectors represent the end of your injection system, here are the different problems you may encounter:
- Dirty Honda E injectors: This can happen because of poor fuel quality, they will let less fuel through or more if they are entirely clogged. So you will probably have one or more cylinders that are not working effectively.
- Leaky Honda E injector: It’s quite often at the high pressure seals that an injector can leak, it can also, more rarely, be cracked or broken.
- Injector Honda E HS: This is the circumstance when your injectors are entirely clogged or when you have an electronic problem, it will not let anything go.
Regarding the signs of illness of injector problems on your Honda E it is about the same as for a defective injection pump. You may encounter problems with starting, throttle response, power loss, and smoke emission.
How to get rid of an injection problem on a Honda E?
To conclude our article on the injection problems on Honda E , we will try to give you the solutions that exist to resolve these problems.
If after a precise diagnosis it’s your injection pump that is the cause of your problems, it will unfortunately be very difficult to intervene on the problem without changing the component, this change quite often goes with the replacement of the injectors, and sometimes the tank, it will take between 2000 and 3000 euros for the whole, try to get several diagnostics and estimates before starting any repair.
Regarding a problem with an injector there are various solutions based on your concerns, here they are:
- Dirty injector: You can clean the injectors of your Honda E, do not be reluctant to seek advice from our content on this subject to get the procedure. If it doesn’t work, you will have to replace them.
- Leaky injector: The replace and the purchase of a joint kit will only cost you a few tens of euros, but you still need to be able to replace it, do not think twice to seek advice from our content on the injectors that leak on Honda E, to have all the solutions available to you.
- Injector HS: Finally, last solution, your injector is damaged or doesn’t work anymore, generally, the replacement of an injector costs around 500 euros labor included.
If you need more guides on the Honda E, go to our Honda E category.
