Having a problem with your car is common, because unfortunately recent automobiles are more and more difficult and consequently exposed to more and more possible breakdowns. In this article we’re going to try to help you to solve an injection problem on your Honda CR V . This is a problem that is specially frustrating because it can ultimately bring your car to non starting or damaged engine. To do this, first we will find out how injection works, then, what are the different problems that can exist on a Honda CR V injectors , and finally, how to solve them.

injection-problem-honda-cr-v

What is the goal of the injection of a Honda CR V?

So we begin our article by quickly explaining how an injection system works so that you have all the information you need to discover the failures associated with it. < br>
The injection system of a Honda CR V handles the fuel intake into the engine , it replaces the old carburettors. It has the advantage to be a lot more precise and to come, under pressure, to discharge the fuel in the engine. The injection pump takes care of pressurizing the fuel and transferring it to the injectors, and the injectors will discharge the fuel in the form of micro-drops into the cylinders of your Honda CR V. The advantage of fuel injection is to have a much more precise dosage than a carburettor and to enable a better air/fuel mixture and consequently a better combustion.

What are the different injection problems on Honda CR V?

Now in this second component, we are going to see the different injection problems and their signs of illness that you may possibly face on your Honda CR V .

Injection pump problems Honda CR V

To start, we will find out the injection pump problems on your Honda CR V, there are not many of them, they are generally recurrent but we will outline them below:

  • Electronic problem of the high pressure pump: If you have an electronic problem, the pressure in your injection system may be too high or too low which will trigger a bad air/fuel mixture and consequently a bad combustion and thus alter the behavior of the engine of your Honda CR V.
  • Leakage from the injection pump of your Honda CR V: If you have a major leakage problem, the consequence will be much the same as if you have a lack of pressure, you will not have enough pressure and consequently the combustion of your fuel will not be good

.
Concerning the consequences and signs of illness of a fuel pump problem on a Honda CR V , you will obviously experience, a lack of power, your engine grazing, dark smoke emissions…

Injectors problems Honda CR V

Now we proceed to the injector problems on Honda CR V . Injectors are the end of your injection system, here are the different problems you may possibly encounter:

  • Dirty Honda CR V injectors: This can happen because of poor fuel quality, they will let less fuel through or more if they are entirely clogged. So you will probably have one or more cylinders that are not functioning properly.
  • Leaky Honda CR V injector: It’s generally at the high pressure seals that an injector can leak, it can also, more rarely, be cracked or broken.
  • Injector Honda CR V HS: This is the case when your injectors are entirely clogged or when you have an electronic problem, it will not let anything go.

Regarding the symptoms of injector problems on your Honda CR V it is about the same as for a faulty injection pump. You may possibly experience problems with starting, throttle response, power loss, and smoke emission.

How to fix an injection problem on a Honda CR V?

To finish our article content on the injection problems on Honda CR V , we will try to give you the solutions that exist to solve these problems.
If after a precise analysis it’s your injection pump that is the cause of your problems, it will unfortunately be very complicated to intervene on the issue without changing the component, this change generally goes with the replacement of the injectors, and in some cases the tank, it will take between 2000 and 3000 euros for the whole, try to get several diagnostics and estimates before starting any repair.
Concerning a problem with an injector there are various solutions depending on your concerns, here they are:

  • Dirty injector: You can clean the injectors of your Honda CR V, do not be reluctant to consult our article on this subject to get the process. If it doesn’t work, you will have to change them.
  • Leaky injector: The change and the purchase of a joint kit will only cost you a few tens of euros, but you still need to have the ability to change it, do not think twice to consult our article on the injectors that leak on Honda CR V, to have all the solutions available to you.
  • Injector HS: Finally, last remedy, your injector is damaged or doesn’t work anymore, in general, the replacement of an injector costs around 500 euros labor included.

To get more tips on the Honda CR V, take a look at the Honda CR V category.