Having a problem with your motor vehicle is traditional, because unfortunately recent vehicles are more and more complex and therefore be subject to more and more possible breakdowns. On this page we’re going to try to help you to solve an injection problem on your Fiat Panda 2 . This is a problem that is specially irritating because it can sooner or later bring your car to non starting or broken engine unit. To do this, first we will see how injection works, then, what are the different problems that can exist on a Fiat Panda 2 injectors , and finally, how to solve them.
What is the goal of the injection of a Fiat Panda 2?
So we commence our article by promptly detailing how an injection system works so that you have all the info you need to understand the failure affiliated with it. < br>
The injection system of a Fiat Panda 2 controls the fuel intake into the engine unit , it replaces the old carburettors. It has the benefit to be a lot more precise and to come, under pressure, to discharge the fuel in the engine unit. The injection pump takes care of pressurizing the fuel and transferring it to the injectors, and the injectors will discharge the fuel in the form of micro-drops into the cylinders of your Fiat Panda 2. The benefit of fuel injection is to have a much more precise dosage than a carburettor and to allow a better air/fuel mixture and therefore a better combustion.
What are the different injection complications on Fiat Panda 2?
Now in this second part, we are going to explore the different injection complications and their symptoms that you might come across on your Fiat Panda 2 .
Injection pump complications Fiat Panda 2
To start, we will see the injection pump complications on your Fiat Panda 2, there are not many of them, they are quite often frequent but we will outline them down below:
- Electronic problem of the high pressure pump: If you have an electronic problem, the pressure in your injection system may be too high or too low which will cause a bad air/fuel mixture and therefore a bad combustion and thus alter the behavior of the engine unit of your Fiat Panda 2.
- Leakage from the injection pump of your Fiat Panda 2: If you have a major leakage problem, the result will be much the same as if you have a lack of pressure, you will not have enough pressure and therefore the combustion of your fuel will not be good
.
Regarding the results and symptoms of a fuel pump problem on a Fiat Panda 2 , you will certainly feel, a lack of power, your engine unit grazing, dark smoke emissions…
Injectors complications Fiat Panda 2
Now we move on to the injector problems on Fiat Panda 2 . Injectors represent the end of your injection system, here are the different complications you might encounter:
- Dirty Fiat Panda 2 injectors: This can happen as a result of poor fuel quality, they will let less fuel through or more if they are totally clogged. So you will potentially have one or more cylinders that are not working properly.
- Leaky Fiat Panda 2 injector: It’s quite often at the high pressure seals that an injector can leak, it can also, more rarely, be cracked or broken.
- Injector Fiat Panda 2 HS: This is the circumstance when your injectors are totally clogged or when you have an electronic problem, it will not let anything go.
Concerning the signs of illness of injector complications on your Fiat Panda 2 it is about the same as for a faulty injection pump. You might experience problems with starting, throttle response, power loss, and smoke emission.
How to solve an injection problem on a Fiat Panda 2?
To conclude our content on the injection complications on Fiat Panda 2 , we will try to give you the solutions that exist to solve these complications.
If after a precise investigation it’s your injection pump that is the source of your complications, it will unfortunately be very complicated to intervene on the problem without replacing the part, this change quite often goes with the replacement of the injectors, and sometimes the tank, it will take between 2000 and 3000 euros for the whole, try to get some diagnostics and estimates before starting any repair.
Regarding a problem with an injector there are different solutions depending on your concerns, here they are:
- Dirty injector: You can clean the injectors of your Fiat Panda 2, do not be reluctant to seek advice from our article on this subject to get the process. If it doesn’t work, you will have to replace them.
- Leaky injector: The replace and the purchase of a joint kit will only cost you a few tens of euros, but you still need to have the ability to replace it, do not think twice to seek advice from our article on the injectors that leak on Fiat Panda 2, to have all the solutions available to you.
- Injector HS: Finally, last solution, your injector is damaged or doesn’t work anymore, in general, the replacement of an injector costs around 500 euros labor included.
If you have any additional questions about the Fiat Panda 2, do not hesitate to consult our Fiat Panda 2 category.
