Having a issue with your motor vehicle is basic, because sadly recent vehicles are more and more difficult and consequently at the mercy of more and more possible breakdowns. In this article we’re going to try to help you to resolve an injection problem on your Fiat Bravo 2 . This is a issue that is particularly frustrating because it can ultimately bring your car to non starting or damaged engine. To do this, first we will see how injection works, then, what are the different problems that can exist on a Fiat Bravo 2 injectors , and at last, how to resolve them.

injection-problem-fiat-bravo-2

What is the purpose of the injection of a Fiat Bravo 2?

So we start our content page by promptly explaining how an injection system works so that you have all the info you need to figure out the failure connected with it. < br>
The injection system of a Fiat Bravo 2 manages the fuel intake into the engine , it replaces the old carburettors. It has the advantage to be far more precise and to come, under pressure, to release the fuel in the engine. The injection pump takes care of pressurizing the fuel and transferring it to the injectors, and the injectors will discharge the fuel in the form of micro-drops into the cylinders of your Fiat Bravo 2. The advantage of fuel injection is to have a much more precise dosage than a carburettor and to allow a better air/fuel mixture and consequently a better combustion.

What are the different injection problems on Fiat Bravo 2?

Now in this second component, we are going to explore the different injection problems and their manifestations that you might encounter on your Fiat Bravo 2 .

Injection pump problems Fiat Bravo 2

To begin, we will see the injection pump problems on your Fiat Bravo 2, there are not many of them, they are quite often frequent but we will outline them below:

  • Electronic issue of the high pressure pump: If you have an electronic issue, the pressure in your injection system might be too high or too low which will cause a bad air/fuel mixture and consequently a bad combustion and thus alter the performance of the engine of your Fiat Bravo 2.
  • Leakage from the injection pump of your Fiat Bravo 2: If you have a major leakage problem, the end result will be much the same as if you have a lack of pressure, you will not have enough pressure and consequently the combustion of your fuel will not be good

.
Regarding the consequences and manifestations of a fuel pump issue on a Fiat Bravo 2 , you will most certainly experience, a lack of power, your engine grazing, dark smoke emissions…

Injectors problems Fiat Bravo 2

Now we move on to the injector problems on Fiat Bravo 2 . Injectors are the end of your injection system, here are the different problems you might encounter:

  • Dirty Fiat Bravo 2 injectors: This can happen because of poor fuel quality, they will let less fuel through or more if they are totally clogged. So you will possibly have one or more cylinders that are not working effectively.
  • Leaky Fiat Bravo 2 injector: It’s quite often at the high pressure seals that an injector can leak, it can also, more rarely, be cracked or broken.
  • Injector Fiat Bravo 2 HS: This is the case when your injectors are totally clogged or when you have an electronic problem, it will not let anything go.

Regarding the symptoms of injector problems on your Fiat Bravo 2 it is about the same as for a defective injection pump. You might experience problems with starting, throttle response, power loss, and smoke emission.

How to solve an injection issue on a Fiat Bravo 2?

To conclude our content page on the injection problems on Fiat Bravo 2 , we will try to give you the solutions that exist to resolve these problems.
If after a precise diagnosis it’s your injection pump that is the source of your problems, it will sadly be very difficult to intervene on the trouble without changing the component, this change quite often goes with the replacement of the injectors, and in some cases the tank, it will take between 2000 and 3000 euros for the whole, try to get some diagnostics and estimates before starting any repair.
Regarding a issue with an injector there are different solutions based on your concerns, here they are:

  • Dirty injector: You can clean the injectors of your Fiat Bravo 2, do not hesitate to seek advice from our content page on this subject to get the procedure. If it doesn’t work, you will have to change them.
  • Leaky injector: The replace and the purchase of a joint kit will only cost you a few tens of euros, but you still need to have the ability to replace it, do not hesitate to seek advice from our content page on the injectors that leak on Fiat Bravo 2, to have all the solutions available to you.
  • Injector HS: Finally, last remedy, your injector is damaged or doesn’t work anymore, generally, the replacement of an injector costs around 500 euros labor included.

If you have any further questions about the Fiat Bravo 2, do not hesitate to consult our Fiat Bravo 2 category.