Having a problem with your car is common, because unfortunately recent vehicles are more and more difficult and therefore exposed to more and more possible breakdowns. On this page we’re going to try to help you to fix an injection problem on your Chrysler 200 . This is a problem that is especially bothersome because it can ultimately bring your vehicle to non starting or broken engine unit. To achieve this, first we will find out how injection works, then, what are the different problems that can exist on a Chrysler 200 injectors , and finally, how to fix them.
What is the aim of the injection of a Chrysler 200?
So we start our content by quickly detailing how an injection system works so that you have all the info you need to discover the failures associated with it. < br>
The injection system of a Chrysler 200 controls the fuel intake into the engine unit , it replaces the old carburettors. It has the benefit to be far more precise and to come, under pressure, to release the fuel in the engine unit. The injection pump takes care of pressurizing the fuel and transferring it to the injectors, and the injectors will discharge the fuel in the form of micro-drops into the cylinders of your Chrysler 200. The benefit of fuel injection is to have a much more precise dosage than a carburettor and to allow a better air/fuel mixture and therefore a better combustion.
What are the different injection complications on Chrysler 200?
Now in this second component, we are going to see the different injection complications and their manifestations that you may possibly come across on your Chrysler 200 .
Injection pump complications Chrysler 200
To begin, we will find out the injection pump complications on your Chrysler 200, there are not many of them, they are generally recurrent but we will outline them down below:
- Electronic problem of the high pressure pump: If you have an electronic problem, the pressure in your injection system might be too high or too low which will trigger a bad air/fuel mixture and therefore a bad combustion and thus alter the performance of the engine unit of your Chrysler 200.
- Leakage from the injection pump of your Chrysler 200: If you have a significant leakage problem, the result will be much the same as if you have a lack of pressure, you will not have enough pressure and therefore the combustion of your fuel will not be good
.
Regarding the outcomes and manifestations of a fuel pump problem on a Chrysler 200 , you will certainly experience, a lack of power, your engine unit grazing, dark smoke emissions…
Injectors complications Chrysler 200
Now we proceed to the injector problems on Chrysler 200 . Injectors are the end of your injection system, here are the different complications you may possibly encounter:
- Dirty Chrysler 200 injectors: This can happen because of poor fuel quality, they will let less fuel through or more if they are totally clogged. So you will possibly have one or more cylinders that are not working properly.
- Leaky Chrysler 200 injector: It’s generally at the high pressure seals that an injector can leak, it can also, more rarely, be cracked or broken.
- Injector Chrysler 200 HS: This is the circumstance when your injectors are totally clogged or when you have an electronic problem, it will not let anything go.
Concerning the symptoms of injector complications on your Chrysler 200 it is about the same as for a defective injection pump. You may possibly experience problems with starting, throttle response, power loss, and smoke emission.
How to solve an injection problem on a Chrysler 200?
To finish our content page on the injection complications on Chrysler 200 , we will try to give you the solutions that exist to fix these complications.
If after a precise analysis it’s your injection pump that is the reason of your complications, it will unfortunately be very complicated to intervene on the problem without replacing the component, this change generally goes with the replacement of the injectors, and sometimes the tank, it will take between 2000 and 3000 euros for the whole, try to get some diagnostics and estimates before starting any repair.
Regarding a problem with an injector there are various solutions based on your concerns, here they are:
- Dirty injector: You can clean the injectors of your Chrysler 200, do not be reluctant to consult our content on this subject to get the process. If it doesn’t work, you will have to change them.
- Leaky injector: The change and the purchase of a joint kit will only cost you a few tens of euros, but you still need to be able to change it, do not think twice to consult our content on the injectors that leak on Chrysler 200, to have all the solutions available to you.
- Injector HS: Finally, last solution, your injector is broken or doesn’t work anymore, generally speaking, the replacement of an injector costs around 500 euros labor included.
In the event that you have any additional questions about the Chrysler 200, do not hesitate to consult our Chrysler 200 category.
