Our vehicles profit from more and more technologies, most of the time this brings us an additional comfort of use. Having said that, technology has its advantages, but as well has some disadvantages, with it, we see bugs appearing! One of them is the Start and Stop feature, which is intended to help you save fuel and preserve the planet. You may confront problems and want to turn off the start stop technology on Citroen Jumper 2 . But how do I do that? In this post we will help you discover how this system works, how to disable start and stop on xxx, and what are the repeated problems you may come across with this option.

stop-start-and-stop-citroen-jumper-2

How does the Start Stop on Citroen Jumper 2 work?

Start Stop technology operation

Start Stop is a modern technology that began to be integrated into modern automobiles about ten years ago. This technology aims to limit the fuel consumption of your Citroen Jumper 2 and to protect the environment by limiting CO2 emissions. Its effectiveness is specifically relevant in an urban environment. In actual fact, vehicles can be made to spend up to 35% of their time at a standstill during urban journeys. The promise of start and stop on your car is to save you between 5% and 15% in fuel consumption. However, on long journeys or secondary roads, its usefulness is limited. How it works:

  • A reinforced starter or a last generation alternator with built-in starter
  • When you shift into neutral and release the clutch pedal, the engine will shut off.
  • When you shift into gear, the car will instantly restart.

On some improved variants, your Citroen Jumper 2 will even have the ability to shut down while you are not stopped (up to 20km/h on some start and stop).

Start Stop Citroen Jumper 2: Positive aspects and disadvantages

Although this system has serious advantages in terms of environmental preservation and fuel economy, there are on the other hand some disadvantages to having a start and stop on Citroen Jumper 2 .

  • Benefits:
  • You will make fuel and CO2 emission savings if you have a specifically urban use of your Citroen Jumper 2. You will too. Furthermore, you will have the ability to benefit from the purchase of a car with a more interesting bonus/malus, permitting you to to buy a cheaper car . Finally, you will benefit from an additional comfort because your engine will be stopped when you complete red lights or stops.

  • Disadvantages
  • It’s not interesting for you to have this system if you drive on secondary roads . This system is actually quite expensive to buy (between 500 and 1500€) . Finally, the first generations of start stop technology can go through a premature wear of the starter and the battery of your Citroen Jumper 2. you will have to buy or change your battery more quite often,

.

How to turn off Start Stop technology on Citroen Jumper 2?

Now let’s proceed to the component you’re probably most enthusiastic about, how to disable, disconnect or remove the start stop on your Citroen Jumper 2? .
Depending on how you use your car, you may desire to disable this system, which can be irritating or you may feel that your starter is going through premature wear, or you may have had to purchase a new AGM or EFB battery on your Citroen Jumper 2 . All these are valid causes to disable your start and stop system.
On this website are the two most important techniques for turning off the start and stop on Citroen Jumper 2:

  • The traditional technique: Know, if you don’t already know it, that there is a start and stop disable button on your center console (depending on the year of your car you may have a button labeled “ECO”, “Start and Stop” or “S&S”) that you can use to disconnect your start and stop on every begin. However, this technique requires you to redo the treatment every time you start the motor vehicle.
  • It is possible that the start and stop of your Citroen Jumper 2 is switched off completely: It is possible that the start and stop of your Citroen Jumper 2 is switched on unintentionally, or that it does not match the use you have of your car. In such a case, you can deactivate it by two different methods. You can create a bridge behind the activation button of your start and stop . Finally, second technique you can disconnect the battery charge indicator cable that is on the terminals of your battery, which will produce your Citroen Jumper 2 presume that the battery is tired and will deactivate the start and stop to keep your autonomy.

Start Stop Technology problems Citroen Jumper 2

Concerning the different problems you might encountered with the start and stop of your Citroen Jumper 2 . It is possible that this is activated in an unpredicted technique , for example you are doing a manoeuvre and you don’t have time to replace to reverse gear and the car stops. It is possible that this problem is associated with the series of your Citroen Jumper 2. Try to completely deactivate your Start and Stop as discovered in the previous section to avoid this problem or go to your mechanic to see if there is a specific remedy. Another problem encountered by Citroen Jumper 2 owners is that you may experience premature wear of your battery or starter motor. These specific parts for start and stop are expensive, and if you have already checked out the battery prices for xxx or those of the starters you must have discovered that they are much more expensive than classic batteries, do not think twice to deactivate this system to avoid this sort of problem. Finally, it might be that your start and stop on Citroen Jumper 2 does not work anymore , in this case, go to your mechanic to solve this problem.

If you need more tutorials on the Citroen Jumper 2, go to our Citroen Jumper 2 category.