Paying attention to your automobile is essential in the present day, in actual fact, if you do not do the minimum routine service of it, or if you do not give some thought to signs of abnormality, you highly risk to find out your car becoming unpleasant to use. This is precisely the theme we are going to discuss today, one of the symptoms that most disturb motorists is the engine unit light, how to turn off the check engine light on its Kia Niro? To accomplish this, in a first step, we will find out what this orange engine light corresponds to, then in a second step how to turn off the engine light on Kia Niro? .

turn-off-engine-lightkia-niro

Signification orange engine light Kia Niro:

Let’s begin our guide with the interpretation of the orange engine light on the dashboard of your Kia Niro . This is the light that tends to put us all under stress and already believe the worst for our car.

What is the check engine light Kia Niro?

First of all, let’s make sure we’re talking about the same light. Indeed, you will find on your dashboard different lights that will turn on or off based on the cycle in which your Kia Niro is in. Some will just be on when you turn on the ignition of your car, it’s especially when the car is on that you have to get worried about the lights that stay on. The engine light or anti-pollution light on Kia Niro is represented by the injection logo, it can be flashing or fixed and orange , we will now find out why this light comes on. And then we will look at how to switch off the engine light on Kia Niro .

Why does the engine light on Kia Niro turn on?

Now, let’s move on to the diagnosis of an orange engine light on Kia Niro. The engine unit light can be either steady on or flashing , we’ll just find out what the reasons are for these two different notifications in your car. Generally speaking, the engine unit light, also named anti-pollution light, suggests that the emissions from your Kia Niro are not at the required levels and that there is therefore a fault somewhere in the process of your engine. Here are the two different situations and the main motives of an engine light on Kia Niro

  • Engine light on fixed on Kia Niro:
    In the first case, if your engine light stays on, it is advised to go quickly to your mechanic so that he can complete your automobile to the diagnostic tool in order to have more points about the damage you have suffered. Even so, here is the main list of the motives of the engine light on Kia Niro. Generally, it is a permanent issue, such as a sensor that no longer works, a temperature sensor, the lambda sensor, or the EGR valve, generally speaking you will experience a loss of power because your Kia Niro will switch to a degraded mode to protect the engine unit of your vehicle.
  • Engine light on and flashing on Kia Niro:
    In the second case, it is the one that you have to be the most careful, a flashing engine light announces an important engine unit damage, stop right away the engine unit of your Kia Niro or go as soon as possible to your mechanic. It suggests that there is probably an important ignition, injection or emission control system issue

How do you turn off check engine light Kia Niro?

Finally, to finish our content page, we will now focus on how to turn off the motor light on your Kia Niro . Be aware, nevertheless, that just wanting to delete, disable the orange engine light on your dashboard , is not a wise decision. In truth, the trigger must be found out and treated beforehand, because if the issue continues, the light will still be on and you risk damaging your engine unit . Here is the process to reach the extinction of the engine unit light on Kia Niro .

Turn off engine light Kia Niro: correct the issue

As we explained to you before, before turning off the engine light of your Kia Niro , you will have to find the origin of its ignition on your dashboard. We also explained to you previously that, based on its behavior, it could indicate more or less important problems.

  • You will need particular tools to find the origin of the issue: In truth, you will need an OBD tool to read the fault codes of your Kia Niro, do not hesitate to go through our guide which will detail the process to stick to. Other tools such as a multimeter or an oscilloscope might also be useful.
  • You can use the technical documentation of your Kia Niro to find out what the faults are and the detailed process of your car.
  • Technical and technological knowledges to be able to interpret the data.
  • Once you find the issue, and before you turn off the engine light on Kia Niro, you’re going to have to replace or remedy the affected component.

Turn off the engine light on Kia Niro:

Now that you have determined the origin of your problem, you will now be able to delete or turn off the orange engine light of your car , to achieve this you will need a diagnostic tool and following an analysis erase the fault codes of your Kia Niro . This process will erase all errors recorded in your vehicle’s ECU and reset the original values. You are finally rid of your issue. If you don’t have the required equipment, make sure to go to your mechanic who will be able to easily erase the engine light on your Kia Niro .

To find more tips on the Kia Niro, take a look at the Kia Niro category.