Having a vehicle is helpful, only a vehicle means a breakdown… And unfortunately, we know very well, also the luckiest among us hardly ever fall through the cracks. Nevertheless, between an automobile that doesn’t start in the morning and breaking down on the highway, the outcomes are going to be quite different. In any case, a Nissan Pulsar that doesn’t drive is difficult to move and the only answer is often to tow it to the nearest garage area. In this article content we will describe how to tow a Nissan Pulsar, respecting the legislation and guaranteeing maximum safety. To do this, first we will have a look at the rules to follow when towing a Nissan Pulsar, then how to tow a Nissan Pulsar yourself, and at last, the most sensible solution is to hire a specialist to tow your car.

how-tow-nissan-pulsar

The rules to follow if you want to tow an Nissan Pulsar

It is in actual fact possible to tow your car. Nevertheless, if you want to go into towing a Nissan Pulsar you will have to follow some restrictions. We present them to you down below:

  • Do not drive on motorways or expressways, because the speed at which you will tow your Nissan Pulsar may put at risk yourself and other drivers if you do it on an expressway.
  • Do not go over 25 km/h, you must all the time stay in control of both vehicles, a high speed will not enable you to anticipate possible problems and the towed car may enter the first one

    • .

  • Limit yourself to short distance journeys. If you have to travel several dozen kilometres, it is better to call a breakdown service.
  • When towing, try to ensure that the Nissan Pulsar and the car towing it are properly lined up, to hold a great behaviour.
  • Switch on the warnings lights on both vehicles.
  • If the Nissan Pulsar being towed has no battery, you will need to use a removable plate plugged into the first car so that you can warn the drivers behind you.

How to tow a Nissan Pulsar by yourself

Now that you have found out the basic specifications for safely towing a Nissan Pulsar, we will teach you the different solutions to do it:

  • Use only a tow bar to tow your Nissan Pulsar, as ropes, straps or other products are not suitable and will only risk you having an incident. If the towing device is flexible, you risk hitting the towing car. It will be better to buy a towing bar.

    • .

  • You can use one of the three types of existing tow bars to tow your Nissan Pulsar, telescopic bars (40 to 50 euros), folding bars (30 to 100 euros) and standard bars (30 to 40 euros).
  • Check that you have two towing rings on the vehicles, which will allow you to connect them together with the tow bar.
  • Check that the towing car is heavier than the car to be towed.
  • Have functional signalling on the Nissan Pulsar to be towed.

These are the regulation to follow if you want to tow your Nissan Pulsar. Nevertheless bear in mind that this method should only be used for short distances to avoid a more expensive towing, if you have a long distance to cover we suggest you to browse the following section.

Have your Nissan Pulsar towed by a specialist

.
To conclude, last part of our guide, if you are not able to tow your Nissan Pulsar in good conditions, it keeps the most reasonable method, to call a tow truck to tow your car. This may look like an expensive choice, but in most insurance contracts, there is a clause that allows you to use their services totally free. Here are the points to verify on your insurance contract before calling a tow truck:

  • That the distance between your home and the place of breakdown is in accordance with the mileage insured in your agreement (generally covered more than 50 km from your home).
  • Check that the problems you are struggling with are well taken care of by your insurer.
  • Finally, verify the deductible amount on your account.

Now you have all the info you need to tow your Nissan Pulsar in good conditions.

If you have any further questions about the Nissan Pulsar, do not hesitate to consult our Nissan Pulsar category.