Modern automobiles have an increasing number of options and even though they provide us a lot of convenience, some of them are not all the time simple to use. Whether you have rented a car, been lent one, or just bought a Toyota Aygo 2, depending on its options, it can be difficult to figure out how to start a Toyota Aygo 2? Even if this required act of running a car may seem very clear to most of you, dependent on the options and the year of production of your car, it will be more or less basic to do so. Today we will demonstrate the different procedures to start a Toyota Aygo 2 with the key, then, in a second section, how to switch on a Toyota Aygo 2 with a card, and at last, without using the key.
How to start a Toyota Aygo 2 with key?
So we start our article which is meant to show you how to start a Toyota Aygo 2, which is equipped with a classic key start. Find down below the different measures to be carried out to turn on the engine of your Toyota Aygo 2:
- Identify the position of the neiman (hole in which the key is introduced), it is almost always on the right side of your steering wheel, on the dash. If your steering wheel is blocked, do not hesitate to browse our article on the steering wheel blocked on Toyota Aygo 2 that is blocked to learn how to unblock it.
- Insert the key into this one.
- Check that you are in neutral for a manual car and in the “N” or “P” position for an automatic transmission.
- Turn the ignition on by turning it clockwise a quarter turn until you feel you’ve passed the first notch.
- Verify on your dashboard that the orange lights go out, if you don’t know what they mean don’t hesitate to browse our article on orange lights on Toyota Aygo 2 to learn the explanation for this.
- You just have to go one more notch clockwise and hold it in the stop until your Toyota Aygo 2 starts (do not let your starter run more than 10 seconds otherwise you risk injuring it, if the car does not start, let it recover a few tens of seconds before a new test)
- That’s it. You handled to start your Toyota Aygo 2,
.
How to start a Toyota Aygo 2 with the key card?
After learning about how to turn on the engine of a Toyota Aygo 2 with key or will explain you how to do it for a Toyota Aygo 2 equipped with a key card and not a key. The procedure is pretty much the same, so don’t hesitate to go back to the previous section to get information on each of the steps to do. Learn below the steps to stick to to start your Toyota Aygo 2 with a card:
- Dependant upon the year and the series, you may or may not need to put in the card in a specific slot, examine on your dashboard if your Toyota Aygo 2 is equipped with this slot or not.
- If it has one, insert the card in this hole, otherwise you can keep the card on you or anywhere in the cabin.
- Locate the “start” button, which is commonly placed at steering wheel height close to the classic neiman location, otherwise it is commonly placed on the centre console.
- Check that you’re in neutral or neutral on an automatic transmission.
- Push the “start” button once to turn on the ignition of your Toyota Aygo 2
- Push a second time after a few seconds or extinction of the orange lights on your dashboard to start your Toyota Aygo 2
.
.
How do I start a Toyota Aygo 2 without a key?
And at last, we will discover, how to start a Toyota Aygo 2 without a key? Let’s imagine that you have lost your keys and your car is open, this may seem logical. Nevertheless, you should know that if your Toyota Aygo 2 is more recent than the mid 90’s it will be hard to turn on it without a key because of all the security devices present on it. Naturally, this should only be done on YOUR car. Here is the procedure to adhere to:
- Remove the cover that covers your steering wheel and find among the 3 electric switches the one that concerns your engine/battery/starter (to help you, please bring your user manual).
- Strip, connect them mutually and isolate the battery and ignition wires (be careful not to electrocute yourself during the procedure). You now have electricity as if you had the contact
- At last, strip the starter wire and connect it promptly with the battery wire (do not make extended contact and only 1 or 2 seconds should be enough to start your Toyota Aygo 2).
There, you’ve found out all the ways to start a Toyota Aygo 2.
To get more tips on the Toyota Aygo 2, take a look at the Toyota Aygo 2 category.
