Contemporary automobiles have a growing number of functionnalities and despite the fact they provide us a lot of convenience, a lot of them are not always simple to operate. No matter you have rented a car, been lent one, or just bought a Subaru Legacy, depending on its functionnalities, it can be tricky to understand how to start a Subaru Legacy? Even if this essential act of running a car may seem very clear to many of you, dependant upon the options and the year of production of your car, it will be more or less simple to do so. On this webpage we will demonstrate the several procedures to start a Subaru Legacy with the key, then, in a second section, how to switch on a Subaru Legacy with a card, and to conclude, without using the key.
How to start a Subaru Legacy with key?
So we begin our article which is designed to show you how to start a Subaru Legacy, which is supplied with a classic key start. Find down below the various measures to be executed to turn on the engine of your Subaru Legacy:
- Discern the position of the neiman (hole in which the key is inserted), it is normally on the right side of your steering wheel, on the dash. If your steering wheel is blocked, do not think twice to read our article on the steering wheel blocked on Subaru Legacy that is blocked to discover how to unblock it.
- Insert the key into this one.
- Verify that you are in neutral for a manual car and in the “N” or “P” position for an automatic transmission.
- Turn the ignition on by turning it clockwise a quarter turn until you feel you’ve passed the first notch.
- Check on your dashboard that the orange lights turn off, if you don’t know what they indicate don’t think twice to read our article on orange lights on Subaru Legacy to know the reason for this.
- You just have to go one more notch clockwise and hold it in the stop until your Subaru Legacy starts (do not let your starter run more than 10 seconds or you risk injuring it, if the car does not start, let it recover a few tens of seconds before a new test)
- That’s it. You handled to start your Subaru Legacy,
.
How to start a Subaru Legacy with the key card?
After finding out about how to turn on the engine of a Subaru Legacy with key or will teach you you how to do it for a Subaru Legacy equipped with a key card and not a key. The operation is still roughly alike, so don’t think twice to return back to the previous part to have information on each of the steps to do. Learn listed below the steps to follow to start your Subaru Legacy with a card:
- According to the year and the series, you may or may not need to insert the card in a dedicated slot, verify on your dashboard if your Subaru Legacy is equipped with this slot or not.
- If it has one, insert the card in this hole, or you can keep the card on you or anywhere in the cabin.
- Locate the “start” button, which is usually based at steering wheel height close to the classic neiman location, otherwise it is usually located on the centre console.
- Verify that you’re in neutral or neutral on an automatic transmission.
- Push the “start” button once to turn on the ignition of your Subaru Legacy
- Push a second time after a few seconds or extinction of the orange lights on your dashboard to start your Subaru Legacy
.
.
How do I start a Subaru Legacy without a key?
And to conclude, we will find out, how to start a Subaru Legacy without a key? Let’s imagine that you have lost your keys and your car is open, this may seem obvious. However, you should know that if your Subaru Legacy is more recent than the mid 90’s it will be complicated to start it without a key because of all the security equipment present on it. As expected, this should only be done on YOUR car. Here is the method to stick to:
- Remove the cover that covers your steering wheel and find among the 3 electric switches the one that concerns your engine/battery/starter (to help you, please bring your user manual).
- Strip, connect them mutually and separate the battery and ignition wires (be careful not to electrocute yourself during the operation). You now have electricity as if you had the contact
- At last, strip the starter wire and connect it promptly with the battery wire (do not make extended contact and only 1 or 2 seconds should be enough to start your Subaru Legacy).
There, you’ve found out all the ways to start a Subaru Legacy.
To get more tips on the Subaru Legacy, take a look at the Subaru Legacy category.
