Contemporary automobiles have more and more functionnalities and even though they bring us a lot of convenience, a lot of them are not all the time simple to use. It doesn’t matter if you have rented a car, been lent one, or just bought a Skoda Enyaq, dependent on its functionnalities, it can be tricky to figure out how to start a Skoda Enyaq? Even if this fundamental act of running a car may seem like common sense to most of you, according to the options and the year of production of your car, it will be more or less simple to do so. Today we will show you the distinct techniques to start a Skoda Enyaq with the key, then, in a second step, how to switch on a Skoda Enyaq with a card, and finally, without using the key.

start-skoda-enyaq

How to start a Skoda Enyaq with key?

So we start our article which is designed to show you how to start a Skoda Enyaq, which is equipped with a classic key start. Find below the different guidelines to be carried out to turn on the engine of your Skoda Enyaq:

  • Determine the position of the neiman (hole in which the key is introduced), it is normally on the right side of your steering wheel, on the dash. If your steering wheel is blocked, do not be reluctant to browse our article on the steering wheel blocked on Skoda Enyaq that is blocked to find out how to unblock it.
  • Insert the key into this one.
  • Examine that you are in neutral for a manual car and in the “N” or “P” position for an automatic transmission.
  • Turn the ignition on by turning it clockwise a quarter turn until you feel you’ve passed the first notch.
  • Check on your dashboard that the orange lights disappear, if you don’t know what they suggest don’t be reluctant to browse our article on orange lights on Skoda Enyaq to discover the explanation for this.
  • You just have to go one more notch clockwise and hold it in the stop until your Skoda Enyaq starts (do not let your starter run more than 10 seconds or you risk harming it, if the car does not start, let it cool down a few tens of seconds before a new testing)

    • .

  • That’s it. You managed to start your Skoda Enyaq,

How to start a Skoda Enyaq with the key card?

After learning about how to turn on the engine of a Skoda Enyaq with key or will demonstrate you how to do it for a Skoda Enyaq equipped with a key card and not a key. The technique remains pretty much similar, so don’t be reluctant to return back to the previous section to get information on each of the steps to do. Discover down below the steps to follow to start your Skoda Enyaq with a card:

  • According to the year and the series, you may or may not need to put in the card in a dedicated slot, verify on your dashboard if your Skoda Enyaq is equipped with this slot or not.
  • If it has one, insert the card in this hole, or you can keep the card on you or anywhere in the cabin.
  • Uncover the “start” button, which is usually located at steering wheel height close to the classic neiman location, otherwise it is usually located on the centre console.
  • Examine that you’re in neutral or neutral on an automatic transmission.
  • Press the “start” button once to turn on the ignition of your Skoda Enyaq

    • .

  • Press a second time after a few seconds or extinction of the orange lights on your dashboard to start your Skoda Enyaq

.

How do I start a Skoda Enyaq without a key?

And finally, we will discover, how to start a Skoda Enyaq without a key? Let’s imagine that you have lost your keys and your car is open, this might seem logical. Even so, you should know that if your Skoda Enyaq is more modern than the mid 90’s it will be hard to turn on it without a key because of all the security equipment present on it. As expected, this should only be done on YOUR car. Here is the process to carry out:

  • Remove the cover that covers your steering wheel and situate among the 3 electric switches the one that concerns your engine/battery/starter (to help you, please bring your user manual).
  • Strip, connect them together and separate the battery and ignition wires (be careful not to electrocute yourself during the process). You now have electricity as if you had the contact
  • At last, strip the starter wire and connect it promptly with the battery wire (do not make extended contact and only 1 or 2 seconds should be enough to start your Skoda Enyaq).

There, you’ve discovered all the solutions to start a Skoda Enyaq.

If you have any further questions about the Skoda Enyaq, do not hesitate to consult our Skoda Enyaq category.