Contemporary automobiles have a growing number of options and even though they give us a lot of comfort, some of them are not all the time simple to operate. It doesn’t matter if you have rented a car, been lent one, or just bought a Peugeot e-2008, dependent on its options, it can be hard to figure out how to start a Peugeot e-2008? Even if this essential act of running a car may seem self evident to many of you, depending on the options and the year of production of your car, it will be more or less elementary to do so. In this article we will teach you the several procedures to start a Peugeot e-2008 with the key, then, in a second section, how to switch on a Peugeot e-2008 with a card, and to finish, without using the key.

start-peugeot-e-2008

How to start a Peugeot e-2008 with key?

So we start our content page which aims to show you how to start a Peugeot e-2008, which is supplied with a classic key start. Find below the different guidelines to be accomplished to turn on the engine of your Peugeot e-2008:

  • Distinguish the location of the neiman (hole in which the key is introduced), it is normally on the right side of your steering wheel, on the dash. If your steering wheel is blocked, do not think twice to browse our content page on the steering wheel blocked on Peugeot e-2008 that is blocked to learn how to unblock it.
  • Insert the key into this one.
  • Check that you are in neutral for a manual car and in the “N” or “P” position for an automatic transmission.
  • Turn the ignition on by turning it clockwise a quarter turn till you feel you’ve passed the first notch.
  • Verify on your dashboard that the orange lights turn off, if you don’t know what they mean don’t think twice to browse our content page on orange lights on Peugeot e-2008 to discover the explanation for this.
  • You just have to go one more notch clockwise and hold it in the stop until your Peugeot e-2008 starts (do not let your starter run more than 10 seconds or you risk injuring it, if the car does not start, let it rest a few tens of seconds before a new test)

    • .

  • That’s it. You handled to start your Peugeot e-2008,

How to start a Peugeot e-2008 with the key card?

After learning about how to turn on the engine of a Peugeot e-2008 with key or will show you you how to do it for a Peugeot e-2008 equipped with a key card and not a key. The process is still roughly the same, so don’t think twice to go back to the previous part to get information on each of the steps to do. Learn down below the steps to follow to start your Peugeot e-2008 with a card:

  • Dependent on the year and the series, you may or may not need to put in the card in a specific slot, verify on your dashboard if your Peugeot e-2008 is equipped with this slot or not.
  • If it has one, insert the card in this hole, or you can keep the card on you or anywhere in the cabin.
  • Uncover the “start” button, which is generally located at steering wheel height close to the classic neiman location, otherwise it is generally positioned on the centre console.
  • Check that you’re in neutral or neutral on an automatic transmission.
  • Push the “start” button once to turn on the ignition of your Peugeot e-2008

    • .

  • Push a second time after a few seconds or extinction of the orange lights on your dashboard to start your Peugeot e-2008

.

How do I start a Peugeot e-2008 without a key?

And to finish, we will see, how to start a Peugeot e-2008 without a key? Let’s imagine that you have lost your keys and your car is open, this might seem obvious. Even so, you should know that if your Peugeot e-2008 is more recent than the mid 90’s it will be tricky to start it without a key because of all the security systems present on it. Naturally, this should only be done on YOUR car. Here is the method to carry out:

  • Remove the cover that protects your steering wheel and find among the 3 electric switches the one that concerns your engine/battery/starter (to help you, please bring your user manual).
  • Strip, connect them mutually and separate the battery and ignition wires (be careful not to electrocute yourself during the procedure). You now have electricity as if you had the contact
  • At last, strip the starter wire and connect it promptly with the battery wire (do not make extended contact and only 1 or 2 seconds should be enough to start your Peugeot e-2008).

There, you’ve discovered all the options to start a Peugeot e-2008.

If you have any additional questions about the Peugeot e-2008, do not hesitate to consult our Peugeot e-2008 category.