Contemporary automobiles have more and more features and despite the fact they provide us a lot of comfort, some of them are not always user friendly. No matter you have rented a car, been lent one, or just bought a Jeep Renegade, depending on its features, it can be tricky to know precisely how to start a Jeep Renegade? Even if this fundamental act of running a car may seem like common sense to most of you, determined by the options and the year of production of your car, it will be more or less simple to do so. On this webpage we will demonstrate the several techniques to start a Jeep Renegade with the key, then, in a second section, how to switch on a Jeep Renegade with a card, and at last, without using the key.

start-jeep-renegade

How to start a Jeep Renegade with key?

So we start our content page which is meant to show you how to start a Jeep Renegade, which is supplied with a classic key start. Find down below the different guidelines to be carried out to turn on the engine of your Jeep Renegade:

  • Determine the position of the neiman (hole in which the key is introduced), it is in most instances on the right side of your steering wheel, on the dashboard. If your steering wheel is blocked, do not hesitate to read our content page on the steering wheel blocked on Jeep Renegade that is blocked to learn how to unblock it.
  • Insert the key into this one.
  • Check that you are in neutral for a manual car and in the “N” or “P” position for an automatic transmission.
  • Turn the ignition on by turning it clockwise a quarter turn up to the point you feel you’ve passed the first notch.
  • Verify on your dashboard that the orange lights disappear, if you don’t know what they indicate don’t hesitate to read our content page on orange lights on Jeep Renegade to discover the explanation for this.
  • You just have to go one more notch clockwise and hold it in the stop until your Jeep Renegade starts (do not let your starter run more than 10 seconds or you risk harming it, if the car does not start, let it cool down a few tens of seconds before a new test)
  • .

  • That’s it. You managed to start your Jeep Renegade,

How to start a Jeep Renegade with the key card?

After finding out about how to turn on the engine of a Jeep Renegade with key or will explain you how to do it for a Jeep Renegade equipped with a key card and not a key. The process is pretty much similar, so don’t hesitate to go back to the previous section to have information on each of the steps to do. Learn down below the guidelines to stick to to start your Jeep Renegade with a card:

  • According to the year and the series, you may or may not need to insert the card in a specific slot, check on your dashboard if your Jeep Renegade is equipped with this slot or not.
  • If it has one, insert the card in this hole, or you can keep the card on you or anywhere in the cabin.
  • Locate the “start” button, which is in most cases located at steering wheel height close to the classic neiman location, otherwise it is in most cases placed on the centre console.
  • Check that you’re in neutral or neutral on an automatic transmission.
  • Push the “start” button once to turn on the ignition of your Jeep Renegade
  • .

  • Push a second time after a few seconds or extinction of the orange lights on your dashboard to start your Jeep Renegade

.

How do I start a Jeep Renegade without a key?

And at last, we will find out, how to start a Jeep Renegade without a key? Let’s imagine that you have lost your keys and your car is open, this might seem logical. Even so, you should know that if your Jeep Renegade is more modern than the mid 90’s it will be difficult to start it without a key because of all the security devices present on it. Of course, this should only be done on YOUR car. Here is the procedure to carry out:

  • Remove the cover that covers your steering wheel and locate among the 3 electric switches the one that concerns your engine/battery/starter (to help you, please bring your user manual).
  • Strip, connect them mutually and isolate the battery and ignition wires (be careful not to electrocute yourself during the operation). You now have electricity as if you had the contact
  • Finally, strip the starter wire and connect it quickly with the battery wire (do not make lengthened contact and only 1 or 2 seconds should be enough to start your Jeep Renegade).

There, you’ve found out all the techniques to start a Jeep Renegade.

Whenever you have any further questions about the Jeep Renegade, do not hesitate to consult our Jeep Renegade category.