Recent vehicles have an increasing number of functionnalities and although they provide us a lot of convenience, some of them are not always simple to operate. No matter you have rented a car, been lent one, or just bought a Chrysler Town & Country, according to its functionnalities, it can be complicated to understand how to start a Chrysler Town & Country? Even if this fundamental act of running a car may seem very clear to many of you, determined by the options and the year of production of your car, it will be more or less simple to do so. Today we will show you the several techniques to start a Chrysler Town & Country with the key, then, in a second step, how to switch on a Chrysler Town & Country with a card, and finally, without using the key.
How to start a Chrysler Town & Country with key?
So we begin our article which is meant to show you how to start a Chrysler Town & Country, which is supplied with a classic key start. Find below the various guidelines to be accomplished to turn on the engine of your Chrysler Town & Country:
- Find the position of the neiman (hole in which the key is introduced), it is normally on the right side of your steering wheel, on the dash. If your steering wheel is blocked, do not think twice to read our article on the steering wheel blocked on Chrysler Town & Country that is blocked to learn how to unblock it.
- Put the key into this one.
- Check that you are in neutral for a manual car and in the “N” or “P” position for an automatic transmission.
- Turn the ignition on by turning it clockwise a quarter turn up to the point you feel you’ve passed the first notch.
- Verify on your dashboard that the orange lights disappear, if you don’t know what they suggest don’t think twice to read our article on orange lights on Chrysler Town & Country to know the explanation for this.
- You just have to go one more notch clockwise and hold it in the stop until your Chrysler Town & Country starts (do not let your starter run more than 10 seconds or you risk injuring it, if the car does not start, let it cool down a few tens of seconds before a new test)
- That’s it. You managed to start your Chrysler Town & Country,
.
How to start a Chrysler Town & Country with the key card?
After discovering how to turn on the engine of a Chrysler Town & Country with key or will explain you how to do it for a Chrysler Town & Country equipped with a key card and not a key. The method is still more or less the same, so don’t think twice to go back to the previous part to have information on each of the steps to do. Discover below the steps to stick to to start your Chrysler Town & Country with a card:
- Dependent on the year and the series, you may or may not need to insert the card in a specific slot, check on your dashboard if your Chrysler Town & Country is equipped with this slot or not.
- If it has one, insert the card in this hole, or you can keep the card on you or anywhere in the cabin.
- Uncover the “start” button, which is commonly placed at steering wheel height close to the classic neiman location, otherwise it is commonly situated on the centre console.
- Check that you’re in neutral or neutral on an automatic transmission.
- Press the “start” button once to turn on the ignition of your Chrysler Town & Country
- Press a second time after a few seconds or extinction of the orange lights on your dashboard to start your Chrysler Town & Country
.
.
How do I start a Chrysler Town & Country without a key?
And finally, we will discover, how to start a Chrysler Town & Country without a key? Let’s imagine that you have lost your keys and your car is open, this may seem logical. However, you should know that if your Chrysler Town & Country is more recent than the mid 90’s it will be complicated to turn on it without a key because of all the security systems present on it. Of course, this should only be done on YOUR car. Here is the method to stick to:
- Remove the cover that covers your steering wheel and locate among the 3 electric switches the one that concerns your engine/battery/starter (to help you, please bring your user manual).
- Strip, connect them together and isolate the battery and ignition wires (be careful not to electrocute yourself during the operation). You now have electricity as if you had the contact
- Finally, strip the starter wire and connect it quickly with the battery wire (do not make prolonged contact and only 1 or 2 seconds should be enough to start your Chrysler Town & Country).
There, you’ve found out all the methods to start a Chrysler Town & Country.
In the event that you have any additional questions about the Chrysler Town & Country, do not hesitate to consult our Chrysler Town & Country category.
