Contemporary vehicles have more and more features and despite the fact they give us a lot of comfort, a lot of them are not all the time easy to use. Regardless whether you have rented a car, been lent one, or just bought a Chrysler 300, according to its features, it can be tricky to understand how to start a Chrysler 300? Even if this required act of running a car may seem evident to most of you, determined by the options and the year of production of your car, it will be more or less basic to do so. Today we will explain the different techniques to start a Chrysler 300 with the key, then, in a second section, how to switch on a Chrysler 300 with a card, and to conclude, without using the key.

start-chrysler-300

How to start a Chrysler 300 with key?

So we commence our article content which is meant to teach you how to start a Chrysler 300, which is furnished with a classic key start. Find under the various guidelines to be accomplished to turn on the engine of your Chrysler 300:

  • Identify the position of the neiman (hole in which the key is inserted), it is almost always on the right side of your steering wheel, on the dash. If your steering wheel is blocked, do not hesitate to have a look at our article content on the steering wheel blocked on Chrysler 300 that is blocked to find out how to unblock it.
  • Insert the key into this one.
  • Examine that you are in neutral for a manual car and in the “N” or “P” position for an automatic transmission.
  • Turn the ignition on by turning it clockwise a quarter turn up to the point you feel you’ve passed the first notch.
  • Check on your dashboard that the orange lights turn off, if you don’t know what they suggest don’t hesitate to have a look at our article content on orange lights on Chrysler 300 to find out the reason for this.
  • You just have to go one more notch clockwise and hold it in the stop until your Chrysler 300 starts (do not let your starter run more than 10 seconds otherwise you risk damaging it, if the car does not start, let it rest a few tens of seconds before a new test)
  • .

  • That’s it. You managed to start your Chrysler 300,

How to start a Chrysler 300 with the key card?

After finding out about how to turn on the engine of a Chrysler 300 with key or will teach you you how to do it for a Chrysler 300 equipped with a key card and not a key. The procedure is still pretty much similar, so don’t hesitate to go back to the previous part to have details on each of the steps to do. Discover down below the steps to adhere to to start your Chrysler 300 with a card:

  • Dependant upon the year and the series, you may or may not need to put in the card in a specific slot, check on your dashboard if your Chrysler 300 is equipped with this slot or not.
  • If it has one, insert the card in this hole, otherwise you can keep the card on you or anywhere in the cabin.
  • Uncover the “start” button, which is usually placed at steering wheel height close to the classic neiman location, otherwise it is usually positioned on the centre console.
  • Examine that you’re in neutral or neutral on an automatic transmission.
  • Push the “start” button once to turn on the ignition of your Chrysler 300
  • .

  • Push a second time after a few seconds or extinction of the orange lights on your dashboard to start your Chrysler 300

.

How do I start a Chrysler 300 without a key?

And to conclude, we will discover, how to start a Chrysler 300 without a key? Let’s imagine that you have lost your keys and your car is open, this might seem logical. However, you should know that if your Chrysler 300 is newer than the mid 90’s it will be tricky to start it without a key because of all the security systems present on it. Of course, this should only be done on YOUR car. Here is the method to adhere to:

  • Remove the cover that covers your steering wheel and locate among the 3 electric switches the one that concerns your engine/battery/starter (to help you, please bring your user manual).
  • Strip, connect them together and isolate the battery and ignition wires (be careful not to electrocute yourself during the process). You now have electricity as if you had the contact
  • At last, strip the starter wire and connect it quickly with the battery wire (do not make lengthened contact and only 1 or 2 seconds should be enough to start your Chrysler 300).

There, you’ve found out all the options to start a Chrysler 300.

To get more tips on the Chrysler 300, take a look at the Chrysler 300 category.