If you’re a bit of a handy person, you’re most certainly eager to handle the majority of the work to be carried out on your volvo v70, but some are more complex than others and require the removal of body parts or elements to access the part you want to operate on. We would really like to help you in this task. That’s why on this web page we are going to discover how to remove the bumper from a volvo v70. This procedure is not very complex and you should have the ability to do it with few tools. To do so , first we will discover how to remove the front bumper of your volvo v70, then how to remove the rear bumper of this one.
How to remove the front bumper from a volvo v70
So let’s commence our document with the front bumper of your volvo v70. To take it off, you will just need a set of ratchet wrenches, some screwdrivers and torx bits. Here are the simple steps you will have to adhere to to be able to disassemble the bumper of your volvo v70 in good conditions:
- If you want to be more comfortable, we advise you to lift your volvo v70 and to remove the front wheels to have a good access to the whole front bumper.
- Open the bonnet of your motor vehicle: Would seem evident, but you will need to have access to the bumper attachment in your engine compartment.
- Remove the wheel arches: They’re also known as fenders, but they’ll get in the way and prevent you from accessing all the screws on the front bumper of your volvo v70. Dependant on your vehicle features and the year of your model, you will also have the ability to find staples, to do this, you will just have to use a staple extractor or to do it gently with a big flat screwdriver, and use a lever to open the staple.
- Then you will have to unscrew the screws that is behind your mudguard and that locks the front bumper of your volvo v70 on the sides.
- Unscrew the screws or remove the clips on the upper part of the bumper in the engine bay.
- Now it’s time to go under your volvo v70 to unscrew the bolts that are on the chassis of the vehicle, you will find some in the middle of the bumper and on the sides.
- Make sure unplug the connection of the plate lighting and the distance control sensor if you have it.
- Carefully remove the front bumper by first unclipping the sides. If it doesn’t come off, you quite likely forgot a screw or a clip. Think of using a carpet or other to prevent that it gets scratched by touching the ground.
That’s it, you’ve seen all the steps of how to remove the front bumper from your volvo v70, to reassemble it adhere to the steps in the opposite way.
How to remove the rear bumper from a volvo v70
And to conclude, even if the operation is quite identical, we will check out the case of removing the rear bumper from your volvo v70. For each step to avoid repeating ourselves we will only give you the broad outlines, refer to part 1 if you have any doubts or questions for more info.
- Start by executing the same first step, that is, lift your volvo v70 and take out your rear wheels to be able to have an optimal working area to remove the bumper of your volvo v70 serenely
- Remove the rear wheel arches of your volvo v70 to access the side bumper side brackets
- Open your trunk
- Remove the side brackets in your wheel arches to make it much easier to remove the bumper from your volvo v70.
- Take out the lower bindings underneath your volvo v70.
- At the same time, make sure to disconnect the rear license plate light and the reverse radar sensors if you are equipped with them.
- Unscrew the top brackets from the top of the trunk.
- Now all you have to do is remove the rear bumper from your volvo v70, adhere to the same procedure as for the front bumper
Here, you have seen through these two parts, how to remove the bumper from a volvo v70 whether it is the front one or the rear one the solutions are just about the same and it is enough to be careful to make everything go well.
To get more tips on the volvo v70, take a look at the volvo v70 category.
