If you’re a bit of a do-it-yourselfer, you’re almost certainly wanting to manage the vast majority of the service to be done on your Volkswagen Rabbit, but some are more complex than others and need the removal of body parts or parts to access the part you want to operate on. We would like to help you in this process. That’s why on this web page we are going to discover how to remove the bumper from a Volkswagen Rabbit. This task is not very complex and you should be able to do it with few tools. To accomplish this, first we will see how to remove the front bumper of your Volkswagen Rabbit, then how to remove the rear bumper of this one.

remove-bumper-volkswagen-rabbit

How to remove the front bumper from a Volkswagen Rabbit

So let’s begin our article content with the front bumper of your Volkswagen Rabbit. To take it off, you will just need a set of ratchet wrenches, some screwdrivers and torx bits. Here are the steps you will have to stick to in order to disassemble the bumper of your Volkswagen Rabbit in good conditions:

  • If you want to be more relaxed, we advise you to lift your Volkswagen Rabbit and to remove the front wheels to have a good access to the whole front bumper.
  • Open the bonnet of your vehicle: Would seem obvious, but you will need to have access to the bumper attachment in your engine compartment.
  • Remove the wheel arches: They’re also referred to as fenders, but they’ll get in the way and prevent you from accessing all the screws on the front bumper of your Volkswagen Rabbit. Depending on your automobile features and the year of your model, you will also have the ability to find staples, to achieve this, you will just have to use a staple extractor or to do it carefully with a big flat screwdriver, and use a lever to open the staple.
  • Then you will have to unscrew the screws that is in back of your mudguard and that fastens the front bumper of your Volkswagen Rabbit on the sides.
  • Unscrew the screws or remove the clips on the upper part of the bumper in the engine compartment.
  • Now it’s time to go beneath your Volkswagen Rabbit to unscrew the bolts that are on the chassis of the automobile, you will find some in the middle of the bumper and on the sides.
  • Remember to unplug the connection of the plate lighting and the distance control sensor if you have it.
  • Carefully remove the front bumper by first unclipping the sides. If it doesn’t come off, you perhaps forgot a screw or a clip. Think of employing a carpet or other to avoid that it gets scratched by touching the ground.

That’s it, you’ve seen all the steps of how to remove the front bumper from your Volkswagen Rabbit, to put it back in place stick to the steps in the opposite way.

How to remove the rear bumper from a Volkswagen Rabbit

And to finish, regardless if the process is quite equivalent, we will take a look at the case of removing the rear bumper from your Volkswagen Rabbit. For each stage to avoid repeating ourselves we will simply give you the broad outlines, read the part 1 if you have any concerns or questions for more details.

  • Start with undertaking the same first stage, that is, lift your Volkswagen Rabbit and remove your rear wheels in order to have an optimal working space to remove the bumper of your Volkswagen Rabbit serenely
  • Remove the rear wheel arches of your Volkswagen Rabbit to access the side bumper side brackets
  • Open your trunk
  • Remove the side brackets in your wheel arches to make it less complicated to remove the bumper from your Volkswagen Rabbit.
  • Take out the lower bindings below your Volkswagen Rabbit.
  • At the same time, be sure you disconnect the rear license plate light and the reverse radar sensors if you are equipped with them.
  • Unscrew the top brackets from the top of the trunk.
  • Now all you have to do is remove the rear bumper from your Volkswagen Rabbit, stick to the same technique as for the front bumper

Here, you have seen through these two parts, how to remove the bumper from a Volkswagen Rabbit whether it is the front one or the rear one the ways are more or less the same and it is enough to be careful to make everything go well.

To discover more tips on the Volkswagen Rabbit, take a look at the Volkswagen Rabbit category.