If you’re a bit of a do-it-yourselfer, you’re likely eager to handle almost all of the service to be completed on your Volkswagen Crafter 2, but some are more difficult than others and require the removal of body parts or elements to access the part you want to work on. We would like to help you in this operation. That’s why today we are going to view how to remove the bumper from a Volkswagen Crafter 2. This operation is not very difficult and you should have the ability to do it with few tools. To accomplish this, first we will see how to remove the front bumper of your Volkswagen Crafter 2, then how to remove the rear bumper of this one.
How to remove the front bumper from a Volkswagen Crafter 2
So let’s begin our document with the front bumper of your Volkswagen Crafter 2. To take it off, you will just require a set of ratchet wrenches, some screwdrivers and torx bits. Here are the simple steps you will have to adhere to to be able to disassemble the bumper of your Volkswagen Crafter 2 in good conditions:
- If you want to be more comfortable, we encourage you to lift your Volkswagen Crafter 2 and to remove the front wheels to have a good access to the whole front bumper.
- Open the bonnet of your automobile: Seems evident, but you will need to have access to the bumper attachment in your engine compartment.
- Take off the wheel arches: They’re also referred to as fenders, but they’ll get in the way and stop you from accessing all the screws on the front bumper of your Volkswagen Crafter 2. According to your motor vehicle features and the year of your model, you will also have the ability to find staples, to accomplish this, you will just have to use a staple extractor or to do it gently with a big flat screwdriver, and use a lever to open the staple.
- Then you will have to unscrew the screws that is from behind your mudguard and that seals the front bumper of your Volkswagen Crafter 2 on the sides.
- Unscrew the screws or remove the clips on the upper part of the bumper in the engine bay.
- Now it’s time to go beneath your Volkswagen Crafter 2 to unscrew the bolts that are on the chassis of the motor vehicle, you will find some in the middle of the bumper and on the sides.
- Make sure to disconnect the connection of the plate lighting and the distance control sensor if you have it.
- Carefully remove the front bumper by first unclipping the sides. If it doesn’t come off, you probably forgot a screw or a clip. Think of employing a carpet or other to avoid that it gets scratched by touching the ground.
That’s it, you’ve seen all the steps of how to remove the front bumper from your Volkswagen Crafter 2, to put it back in place adhere to the steps in the opposite way.
How to remove the rear bumper from a Volkswagen Crafter 2
And to finish, whether or not the operation is quite identical, we will check out the case of removing the rear bumper from your Volkswagen Crafter 2. For each step to avoid repeating ourselves we will exclusively give you the broad highlights, read the part 1 if you have any doubts or questions for more information.
- Start by carrying out the same first step, that is, lift your Volkswagen Crafter 2 and remove your rear wheels to be able to have an optimal working space to remove the bumper of your Volkswagen Crafter 2 serenely
- Remove the rear wheel arches of your Volkswagen Crafter 2 to access the side bumper side brackets
- Open your trunk
- Take off the side brackets in your wheel arches to make it more convenient to remove the bumper from your Volkswagen Crafter 2.
- Remove the lower bindings below your Volkswagen Crafter 2.
- While doing so, be sure you disconnect the rear license plate light and the reverse radar sensors if you are equipped with them.
- Unscrew the top brackets from the top of the trunk.
- Now all you have to do is remove the rear bumper from your Volkswagen Crafter 2, adhere to the same procedure as for the front bumper
Here, you have seen through these two parts, how to remove the bumper from a Volkswagen Crafter 2 whether it is the front one or the rear one the approaches are almost the same and it is enough to be meticulous to make everything go well.
If you wish more tutorials on the Volkswagen Crafter 2, go to our Volkswagen Crafter 2 category.
