If you’re a bit of a do-it-yourselfer, you’re quite likely willing to take care of the majority of the maintenance to be achieved on your Toyota Yaris, but some are more difficult than others and require the removal of body parts or elements to access the component you want to operate on. We would really like to help you in this task. That’s why on this web page we are going to find out how to remove the bumper from a Toyota Yaris. This process is not very difficult and you should be able to do it with few tools. For that, first we will discover how to remove the front bumper of your Toyota Yaris, then how to remove the rear bumper of this one.
How to remove the front bumper from a Toyota Yaris
So let’s start our content page with the front bumper of your Toyota Yaris. To remove it, you will just need a set of ratchet wrenches, some screwdrivers and torx bits. Here are the steps you will have to follow in order to disassemble the bumper of your Toyota Yaris in good conditions:
- If you want to be more comfy, we advise you to put your Toyota Yaris on stands and to remove the front wheels to have a perfect access to the whole front bumper.
- Open the bonnet of your automobile: Seems evident, but you will need to have access to the bumper attachment in your engine compartment.
- Remove the wheel arches: They’re also identified as fenders, but they’ll get in the way and stop you from accessing all the screws on the front bumper of your Toyota Yaris. According to your vehicle features and the year of your model, you will also have the ability to find staples, to do this, you will just have to use a staple extractor or to do it carefully with a big flat screwdriver, and use a lever to open the staple.
- Then you will have to unscrew the screws that is behind your mudguard and that seals the front bumper of your Toyota Yaris on the sides.
- Unscrew the screws or remove the clips on the upper part of the bumper in the engine compartment.
- Now it’s time to go underneath your Toyota Yaris to unscrew the bolts that are on the chassis of the vehicle, you will find some in the middle of the bumper and on the sides.
- Remember to disconnect the connection of the plate lighting and the distance control sensor if you have it.
- Carefully remove the front bumper by first unclipping the sides. If it doesn’t come off, you quite likely forgot a screw or a clip. Think of employing a carpet or other to prevent that it gets scratched by touching the ground.
That’s it, you’ve seen all the steps of how to remove the front bumper from your Toyota Yaris, to reassemble it follow the steps in the opposite direction.
How to remove the rear bumper from a Toyota Yaris
And now, whether or not the operation is quite identical, we will look at the case of removing the rear bumper from your Toyota Yaris. For each step to avoid repeating ourselves we will only give you the broad highlights, refer to part 1 if you have any doubts or questions for more information.
- Start with undertaking the same first step, that is, lift your Toyota Yaris and remove your rear wheels in order to have an optimal working area to remove the bumper of your Toyota Yaris without trouble
- Remove the rear wheel arches of your Toyota Yaris to access the side bumper side brackets
- Open your trunk
- Remove the side brackets in your wheel arches to make it easier to remove the bumper from your Toyota Yaris.
- Take off the lower bindings underneath your Toyota Yaris.
- Simultaneously, make sure un plug the rear license plate light and the reverse radar sensors if you are equipped with them.
- Unscrew the top brackets from the top of the trunk.
- Now all you have to do is remove the rear bumper from your Toyota Yaris, follow the same process as for the front bumper
Here, you have learned through these two parts, how to remove the bumper from a Toyota Yaris whether it is the front one or the rear one the approaches are just about the same and it is enough to be careful to make everything go well.
If you wish more guides on the Toyota Yaris, go to our Toyota Yaris category.
