If you’re a bit of a do-it-yourselfer, you’re most likely wanting to manage the vast majority of the work to be completed on your Toyota Corolla, but some are more difficult than others and necessitate the removal of body parts or parts to access the part you want to work on. We would like to help you in this process. That’s why on this web page we are going to view how to remove the bumper from a Toyota Corolla. This process is not very difficult and you should be able to do it with few tools. To accomplish this, first we will see how to remove the front bumper of your Toyota Corolla, then how to remove the rear bumper of this one.

remove-bumper-toyota-corolla

How to remove the front bumper from a Toyota Corolla

So let’s begin our content page with the front bumper of your Toyota Corolla. To take it off, you will just require a set of ratchet wrenches, some screwdrivers and torx bits. Here are the simple steps you will have to adhere to to be able to disassemble the bumper of your Toyota Corolla in good conditions:

  • If you want to be more comfortable, we recommend you to lift your Toyota Corolla and to remove the front wheels to have a perfect access to the whole front bumper.
  • Open the bonnet of your vehicle: Would seem obvious, but you will need to have access to the bumper attachment in your engine compartment.
  • Take away the wheel arches: They’re also identified as fenders, but they’ll get in the way and prevent you from accessing all the screws on the front bumper of your Toyota Corolla. Depending on your car features and the year of your model, you will also have the ability to find staples, to achieve this, you will just have to use a staple extractor or to do it gently with a big flat screwdriver, and use a lever to open the staple.
  • Then you will have to unscrew the screws that is in back of your mudguard and that locks the front bumper of your Toyota Corolla on the sides.
  • Unscrew the screws or remove the clips on the upper part of the bumper in the engine compartment.
  • Now it’s time to go below your Toyota Corolla to unscrew the bolts that are on the chassis of the car, you will find some in the middle of the bumper and on the sides.
  • Make sure disconnect the connection of the plate lighting and the distance control sensor if you have it.
  • Carefully remove the front bumper by first unclipping the sides. If it doesn’t come off, you quite likely forgot a screw or a clip. Think of working with a carpet or other to avoid that it gets scratched by touching the ground.

That’s it, you’ve seen all the steps of how to remove the front bumper from your Toyota Corolla, to put it back in place adhere to the steps in the opposite direction.

How to remove the rear bumper from a Toyota Corolla

And to finish, regardless if the procedure is quite equivalent, we will check out the case of removing the rear bumper from your Toyota Corolla. For each stage to avoid repeating ourselves we will simply give you the broad outlines, refer to part 1 if you have any uncertainties or questions for more details.

  • Start with executing the same first stage, that is, lift your Toyota Corolla and take out your rear wheels to be able to have an optimal working area to remove the bumper of your Toyota Corolla serenely
  • Remove the rear wheel arches of your Toyota Corolla to access the side bumper side brackets
  • Open your trunk
  • Take away the side brackets in your wheel arches to make it easier to remove the bumper from your Toyota Corolla.
  • Take away the lower bindings underneath your Toyota Corolla.
  • While doing so, be sure you un plug the rear license plate light and the reverse radar sensors if you are equipped with them.
  • Unscrew the top brackets from the top of the trunk.
  • Now all you have to do is remove the rear bumper from your Toyota Corolla, adhere to the same procedure as for the front bumper

Here, you have seen through these two parts, how to remove the bumper from a Toyota Corolla whether it is the front one or the rear one the techniques are essentially the same and it is enough to be meticulous to make everything go well.

To get more tips on the Toyota Corolla, take a look at the Toyota Corolla category.