If you’re a bit of a do-it-yourselfer, you’re probably wanting to manage the majority of the maintenance to be achieved on your smart fortwo, but some are more complex than others and need the removal of body parts or parts to access the part you want to work on. We would like to help you in this operation. That’s why on this web page we are going to view how to remove the bumper from a smart fortwo. This action is not very complex and you should be able to do it with few tools. To do so , first we will discover how to remove the front bumper of your smart fortwo, then how to remove the rear bumper of this one.
How to remove the front bumper from a smart fortwo
So let’s commence our document with the front bumper of your smart fortwo. To remove it, you will just require a set of ratchet wrenches, some screwdrivers and torx bits. Here are the steps you will have to stick to to be able to disassemble the bumper of your smart fortwo in good conditions:
- If you want to be more comfortable, we suggest you to lift your smart fortwo and to remove the front wheels to have a best access to the whole front bumper.
- Open the bonnet of your motor vehicle: Would seem obvious, but you will need to have access to the bumper attachment in your engine compartment.
- Take away the wheel arches: They’re also identified as fenders, but they’ll get in the way and stop you from accessing all the screws on the front bumper of your smart fortwo. Depending on your motor vehicle features and the year of your model, you will also be able to find staples, to achieve this, you will just have to use a staple extractor or to do it carefully with a big flat screwdriver, and use a lever to open the staple.
- Then you will have to unscrew the screws that is behind your mudguard and that locks the front bumper of your smart fortwo on the sides.
- Unscrew the screws or remove the clips on the upper part of the bumper in the engine compartment.
- Now it’s time to go beneath your smart fortwo to unscrew the bolts that are on the chassis of the motor vehicle, you will find some in the middle of the bumper and on the sides.
- Make sure to disconnect the connection of the plate lighting and the distance control sensor if you have it.
- Carefully remove the front bumper by first unclipping the sides. If it doesn’t come off, you almost certainly forgot a screw or a clip. Think of working with a carpet or other to avoid that it gets scratched by touching the ground.
That’s it, you’ve seen all the steps of how to remove the front bumper from your smart fortwo, to put it back in place stick to the steps in the opposite way.
How to remove the rear bumper from a smart fortwo
And now, even if the operation is quite similar, we will take a look at the case of removing the rear bumper from your smart fortwo. For each stage to avoid repeating ourselves we will just give you the broad outlines, read the part 1 if you have any concerns or questions for more info.
- Start with executing the same first stage, that is, lift your smart fortwo and take out your rear wheels to be able to have an optimal working space to remove the bumper of your smart fortwo without trouble
- Remove the rear wheel arches of your smart fortwo to access the side bumper side brackets
- Open your trunk
- Take away the side brackets in your wheel arches to make it easier to remove the bumper from your smart fortwo.
- Take away the lower bindings below your smart fortwo.
- While doing so, remember to un plug the rear license plate light and the reverse radar sensors if you are equipped with them.
- Unscrew the top brackets from the top of the trunk.
- Now all you have to do is remove the rear bumper from your smart fortwo, stick to the same method as for the front bumper
Here, you have discoverd through these two parts, how to remove the bumper from a smart fortwo whether it is the front one or the rear one the methods are pretty much the same and it is enough to be meticulous to make everything go well.
If you wish more guides on the smart fortwo, go to our smart fortwo category.
