If you’re a bit of a do-it-yourselfer, you’re almost certainly wanting to look after most of the maintenance to be achieved on your seat altea, but some are more difficult than others and require the removal of body parts or parts to access the part you want to work on. We really want to help you in this task. That’s why on this web page we are going to view how to remove the bumper from a seat altea. This operation is not very difficult and you should have the ability to do it with few tools. To accomplish this, first we will discover how to remove the front bumper of your seat altea, then how to remove the rear bumper of this one.

remove-bumper-seat-altea

How to remove the front bumper from a seat altea

So let’s begin our content page with the front bumper of your seat altea. To take it off, you will just need a set of ratchet wrenches, some screwdrivers and torx bits. Here are the simple steps you will have to stick to in order to disassemble the bumper of your seat altea in good conditions:

  • If you want to be more relaxed, we advise you to lift your seat altea and to remove the front wheels to have a perfect access to the whole front bumper.
  • Open the bonnet of your motor vehicle: Would seem evident, but you will need to have access to the bumper attachment in your engine compartment.
  • Take out the wheel arches: They’re also referred to as fenders, but they’ll get in the way and stop you from accessing all the screws on the front bumper of your seat altea. Depending on your vehicle features and the year of your model, you will also be able to find staples, to achieve this, you will just have to use a staple extractor or to do it carefully with a big flat screwdriver, and use a lever to open the staple.
  • Then you will have to unscrew the screws that is in back of your mudguard and that fastens the front bumper of your seat altea on the sides.
  • Unscrew the screws or remove the clips on the upper part of the bumper in the engine compartment.
  • Now it’s time to go below your seat altea to unscrew the bolts that are on the chassis of the vehicle, you will find some in the middle of the bumper and on the sides.
  • Make sure disconnect the connection of the plate lighting and the distance control sensor if you have it.
  • Carefully remove the front bumper by first unclipping the sides. If it doesn’t come off, you perhaps forgot a screw or a clip. Think of working with a carpet or other to avoid that it gets scratched by touching the ground.

That’s it, you’ve seen all the steps of how to remove the front bumper from your seat altea, to reassemble it stick to the steps in the opposite way.

How to remove the rear bumper from a seat altea

And to conclude, regardless if the operation is quite similar, we will check out the case of removing the rear bumper from your seat altea. For each stage to avoid repeating ourselves we will just give you the broad highlights, refer to part 1 if you have any concerns or questions for more info.

  • Start with undertaking the same first stage, that is, lift your seat altea and take out your rear wheels in order to have an ideal working space to remove the bumper of your seat altea serenely
  • Remove the rear wheel arches of your seat altea to access the side bumper side brackets
  • Open your trunk
  • Take out the side brackets in your wheel arches to make it more convenient to remove the bumper from your seat altea.
  • Take away the lower bindings below your seat altea.
  • At the same time, make sure to disconnect the rear license plate light and the reverse radar sensors if you are equipped with them.
  • Unscrew the top brackets from the top of the trunk.
  • Now all you have to do is remove the rear bumper from your seat altea, stick to the same operation as for the front bumper

Here, you have discoverd through these two parts, how to remove the bumper from a seat altea whether it is the front one or the rear one the ways are practically the same and it is enough to be meticulous to make everything go well.

In the event that you have any additional questions about the seat altea, do not hesitate to consult our seat altea category.