If you’re a bit of a do-it-yourselfer, you’re probably eager to take care of the vast majority of the service to be completed on your Renault Megane 3, but some are more challenging than others and require the removal of body parts or elements to access the component you want to work on. We want to help you in this operation. That’s why on this web page we are going to view how to remove the bumper from a Renault Megane 3. This procedure is not very challenging and you should be able to do it with few tools. For that, first we will discover how to remove the front bumper of your Renault Megane 3, then how to remove the rear bumper of this one.

remove-bumper-renault-megane-3

How to remove the front bumper from a Renault Megane 3

So let’s begin our article content with the front bumper of your Renault Megane 3. To take it off, you will just need a set of ratchet wrenches, some screwdrivers and torx bits. Here are the guidelines you will have to stick to to be able to disassemble the bumper of your Renault Megane 3 in good conditions:

  • If you want to be more comfortable, we encourage you to put your Renault Megane 3 on stands and to remove the front wheels to have a good access to the whole front bumper.
  • Open the bonnet of your car: Seems obvious, but you will need to have access to the bumper attachment in your engine compartment.
  • Take out the wheel arches: They’re also described as fenders, but they’ll get in the way and stop you from accessing all the screws on the front bumper of your Renault Megane 3. According to your automobile features and the year of your model, you will also be able to find staples, to get this done, you will just have to use a staple extractor or to do it gently with a big flat screwdriver, and use a lever to open the staple.
  • Then you will have to unscrew the screws that is at the rear of your mudguard and that locks the front bumper of your Renault Megane 3 on the sides.
  • Unscrew the screws or remove the clips on the upper part of the bumper in the engine compartment.
  • Now it’s time to go underneath your Renault Megane 3 to unscrew the bolts that are on the chassis of the automobile, you will find some in the middle of the bumper and on the sides.
  • Remember to unplug the connection of the plate lighting and the distance control sensor if you have it.
  • Carefully remove the front bumper by first unclipping the sides. If it doesn’t come off, you perhaps forgot a screw or a clip. Think of using a carpet or other to avoid that it gets scratched by touching the ground.

That’s it, you’ve seen all the steps of how to remove the front bumper from your Renault Megane 3, to reassemble it stick to the steps in the opposite way.

How to remove the rear bumper from a Renault Megane 3

And to finish, even if the process is quite similar, we will check out the case of removing the rear bumper from your Renault Megane 3. For each stage to avoid repeating ourselves we will simply give you the broad highlights, refer to part 1 if you have any doubts or questions for more details.

  • Start with carrying out the same first stage, that is, lift your Renault Megane 3 and remove your rear wheels to be able to have an ideal working space to remove the bumper of your Renault Megane 3 without trouble
  • Remove the rear wheel arches of your Renault Megane 3 to access the side bumper side brackets
  • Open your trunk
  • Take out the side brackets in your wheel arches to make it more convenient to remove the bumper from your Renault Megane 3.
  • Remove the lower bindings below your Renault Megane 3.
  • At the same time, be sure you disconnect the rear license plate light and the reverse radar sensors if you are equipped with them.
  • Unscrew the top brackets from the top of the trunk.
  • Now all you have to do is remove the rear bumper from your Renault Megane 3, stick to the same method as for the front bumper

Here, you have discoverd through these two parts, how to remove the bumper from a Renault Megane 3 whether it is the front one or the rear one the approaches are pretty much the same and it is enough to be meticulous to make everything go well.

If you want more tutorials on the Renault Megane 3, go to our Renault Megane 3 category.