If you’re a bit of a do-it-yourselfer, you’re most likely willing to manage most of the maintenance to be carried out on your Renault Master 3, but some are more complicated than others and need the removal of body parts or components to access the component you want to operate on. We would really like to help you in this operation. That’s why on this web page we are going to see how to remove the bumper from a Renault Master 3. This procedure is not very complicated and you should have the ability to do it with few equipment. For that, first we will see how to remove the front bumper of your Renault Master 3, then how to remove the rear bumper of this one.
How to remove the front bumper from a Renault Master 3
So let’s start our article content with the front bumper of your Renault Master 3. To remove it, you will just require a set of ratchet wrenches, some screwdrivers and torx bits. Here are the guidelines you will have to stick to in order to disassemble the bumper of your Renault Master 3 in good conditions:
- If you want to be more comfy, we suggest you to lift your Renault Master 3 and to remove the front wheels to have a best access to the whole front bumper.
- Open the bonnet of your automobile: Would seem evident, but you will need to have access to the bumper attachment in your engine compartment.
- Take away the wheel arches: They’re also called fenders, but they’ll get in the way and stop you from accessing all the screws on the front bumper of your Renault Master 3. According to your automobile features and the year of your model, you will also be able to find staples, to achieve this, you will just have to use a staple extractor or to do it gently with a big flat screwdriver, and use a lever to open the staple.
- Then you will have to unscrew the screws that is at the rear of your mudguard and that seals the front bumper of your Renault Master 3 on the sides.
- Unscrew the screws or remove the clips on the upper part of the bumper in the engine compartment.
- Now it’s time to go beneath your Renault Master 3 to unscrew the bolts that are on the chassis of the automobile, you will find some in the middle of the bumper and on the sides.
- Be sure you disconnect the connection of the plate lighting and the distance control sensor if you have it.
- Carefully remove the front bumper by first unclipping the sides. If it doesn’t come off, you most likely forgot a screw or a clip. Think of employing a carpet or other to avoid that it gets scratched by touching the ground.
That’s it, you’ve seen all the steps of how to remove the front bumper from your Renault Master 3, to put it back in place stick to the steps in the opposite direction.
How to remove the rear bumper from a Renault Master 3
And to finish, whether or not the process is quite identical, we will check out the case of removing the rear bumper from your Renault Master 3. For each step to avoid repeating ourselves we will just give you the broad highlights, read the part 1 if you have any concerns or questions for more information.
- Start with executing the same first step, that is, lift your Renault Master 3 and take out your rear wheels in order to have an ideal working area to remove the bumper of your Renault Master 3 serenely
- Remove the rear wheel arches of your Renault Master 3 to access the side bumper side brackets
- Open your trunk
- Take away the side brackets in your wheel arches to make it more convenient to remove the bumper from your Renault Master 3.
- Remove the lower bindings underneath your Renault Master 3.
- Simultaneously, remember to un plug the rear license plate light and the reverse radar sensors if you are equipped with them.
- Unscrew the top brackets from the top of the trunk.
- Now all you have to do is remove the rear bumper from your Renault Master 3, stick to the same operation as for the front bumper
Here, you have seen through these two parts, how to remove the bumper from a Renault Master 3 whether it is the front one or the rear one the ways are practically the same and it is enough to be meticulous to make everything go well.
If you need more tutorials on the Renault Master 3, go to our Renault Master 3 category.
