If you’re a bit of a do-it-yourselfer, you’re most likely keen to take care of the majority of the maintenance to be carried out on your Peugeot Rifter, but some are more challenging than others and require the removal of body parts or components to access the part you want to focus on. We would like to help you in this task. That’s why in this article we are going to view how to remove the bumper from a Peugeot Rifter. This action is not very challenging and you should have the ability to do it with few equipment. For that, first we will see how to remove the front bumper of your Peugeot Rifter, then how to remove the rear bumper of this one.

remove-bumper-peugeot-rifter

How to remove the front bumper from a Peugeot Rifter

So let’s commence our article with the front bumper of your Peugeot Rifter. To remove it, you will just require a set of ratchet wrenches, some screwdrivers and torx bits. Here are the simple steps you will have to adhere to in order to disassemble the bumper of your Peugeot Rifter in good conditions:

  • If you want to be more comfortable, we recommend you to lift your Peugeot Rifter and to remove the front wheels to have a best access to the whole front bumper.
  • Open the bonnet of your automobile: Would seem obvious, but you will need to have access to the bumper attachment in your engine compartment.
  • Remove the wheel arches: They’re also called fenders, but they’ll get in the way and prevent you from accessing all the screws on the front bumper of your Peugeot Rifter. According to your motor vehicle features and the year of your model, you will also have the ability to find staples, to achieve this, you will just have to use a staple extractor or to do it carefully with a big flat screwdriver, and use a lever to open the staple.
  • Then you will have to unscrew the screws that is behind your mudguard and that seals the front bumper of your Peugeot Rifter on the sides.
  • Unscrew the screws or remove the clips on the upper part of the bumper in the engine bay.
  • Now it’s time to go underneath your Peugeot Rifter to unscrew the bolts that are on the chassis of the motor vehicle, you will find some in the middle of the bumper and on the sides.
  • Remember to disconnect the connection of the plate lighting and the distance control sensor if you have it.
  • Carefully remove the front bumper by first unclipping the sides. If it doesn’t come off, you most likely forgot a screw or a clip. Think of working with a carpet or other to avoid that it gets scratched by touching the ground.

That’s it, you’ve seen all the steps of how to remove the front bumper from your Peugeot Rifter, to reassemble it adhere to the steps in the opposite way.

How to remove the rear bumper from a Peugeot Rifter

And to finish, regardless if the operation is quite equivalent, we will look at the case of removing the rear bumper from your Peugeot Rifter. For each stage to avoid repeating ourselves we will just give you the broad highlights, refer to part 1 if you have any concerns or questions for more info.

  • Start with carrying out the same first stage, that is, lift your Peugeot Rifter and take out your rear wheels in order to have an optimal working area to remove the bumper of your Peugeot Rifter serenely
  • Remove the rear wheel arches of your Peugeot Rifter to access the side bumper side brackets
  • Open your trunk
  • Remove the side brackets in your wheel arches to make it much easier to remove the bumper from your Peugeot Rifter.
  • Take out the lower bindings underneath your Peugeot Rifter.
  • Simultaneously, make sure disconnect the rear license plate light and the reverse radar sensors if you are equipped with them.
  • Unscrew the top brackets from the top of the trunk.
  • Now all you have to do is remove the rear bumper from your Peugeot Rifter, adhere to the same process as for the front bumper

Here, you have discoverd through these two parts, how to remove the bumper from a Peugeot Rifter whether it is the front one or the rear one the techniques are more or less the same and it is enough to be meticulous to make everything go well.

If you need more guides on the Peugeot Rifter, go to our Peugeot Rifter category.