If you’re a bit of a handy person, you’re likely eager to handle almost all of the work to be completed on your Peugeot Partner 2, but some are more complicated than others and need the removal of body parts or elements to access the component you want to operate on. We want to help you in this process. That’s why today we are going to discover how to remove the bumper from a Peugeot Partner 2. This action is not very complicated and you should have the ability to do it with few equipment. For that, first we will discover how to remove the front bumper of your Peugeot Partner 2, then how to remove the rear bumper of this one.
How to remove the front bumper from a Peugeot Partner 2
So let’s begin our document with the front bumper of your Peugeot Partner 2. To take it off, you will just need a set of ratchet wrenches, some screwdrivers and torx bits. Here are the simple steps you will have to stick to in order to disassemble the bumper of your Peugeot Partner 2 in good conditions:
- If you want to be more comfy, we recommend you to lift your Peugeot Partner 2 and to remove the front wheels to have a best access to the whole front bumper.
- Open the bonnet of your automobile: Seems evident, but you will need to have access to the bumper attachment in your engine compartment.
- Remove the wheel arches: They’re also identified as fenders, but they’ll get in the way and stop you from accessing all the screws on the front bumper of your Peugeot Partner 2. According to your motor vehicle features and the year of your model, you will also have the ability to find staples, to do this, you will just have to use a staple extractor or to do it carefully with a big flat screwdriver, and use a lever to open the staple.
- Then you will have to unscrew the screws that is in back of your mudguard and that locks the front bumper of your Peugeot Partner 2 on the sides.
- Unscrew the screws or remove the clips on the upper part of the bumper in the engine bay.
- Now it’s time to go underneath your Peugeot Partner 2 to unscrew the bolts that are on the chassis of the motor vehicle, you will find some in the middle of the bumper and on the sides.
- Be sure you disconnect the connection of the plate lighting and the distance control sensor if you have it.
- Carefully remove the front bumper by first unclipping the sides. If it doesn’t come off, you quite likely forgot a screw or a clip. Think of employing a carpet or other to prevent that it gets scratched by touching the ground.
That’s it, you’ve seen all the steps of how to remove the front bumper from your Peugeot Partner 2, to reassemble it stick to the steps in the opposite way.
How to remove the rear bumper from a Peugeot Partner 2
And to finish, even if the procedure is quite similar, we will check out the case of removing the rear bumper from your Peugeot Partner 2. For each stage to avoid repeating ourselves we will only give you the broad highlights, refer to part 1 if you have any uncertainties or questions for more information.
- Start by executing the same first stage, that is, lift your Peugeot Partner 2 and take out your rear wheels in order to have an optimal working space to remove the bumper of your Peugeot Partner 2 serenely
- Remove the rear wheel arches of your Peugeot Partner 2 to access the side bumper side brackets
- Open your trunk
- Remove the side brackets in your wheel arches to make it much easier to remove the bumper from your Peugeot Partner 2.
- Take off the lower bindings underneath your Peugeot Partner 2.
- While doing so, be sure you un plug the rear license plate light and the reverse radar sensors if you are equipped with them.
- Unscrew the top brackets from the top of the trunk.
- Now all you have to do is remove the rear bumper from your Peugeot Partner 2, stick to the same technique as for the front bumper
Here, you have discoverd through these two parts, how to remove the bumper from a Peugeot Partner 2 whether it is the front one or the rear one the ways are practically the same and it is enough to be careful to make everything go well.
If you need more guides on the Peugeot Partner 2, go to our Peugeot Partner 2 category.
