If you’re a bit of a do-it-yourselfer, you’re quite likely keen to manage the majority of the service to be completed on your Peugeot Expert Tepee, but some are more complicated than others and require the removal of body parts or parts to access the component you want to operate on. We would like to help you in this process. That’s why today we are going to find out how to remove the bumper from a Peugeot Expert Tepee. This task is not very complicated and you should be able to do it with few tools. To accomplish this, first we will see how to remove the front bumper of your Peugeot Expert Tepee, then how to remove the rear bumper of this one.

remove-bumper-peugeot-expert-tepee

How to remove the front bumper from a Peugeot Expert Tepee

So let’s commence our content page with the front bumper of your Peugeot Expert Tepee. To remove it, you will just need a set of ratchet wrenches, some screwdrivers and torx bits. Here are the simple steps you will have to adhere to in order to disassemble the bumper of your Peugeot Expert Tepee in good conditions:

  • If you want to be more comfortable, we suggest you to lift your Peugeot Expert Tepee and to remove the front wheels to have a good access to the whole front bumper.
  • Open the bonnet of your vehicle: Would seem evident, but you will need to have access to the bumper attachment in your engine compartment.
  • Take out the wheel arches: They’re also known as fenders, but they’ll get in the way and stop you from accessing all the screws on the front bumper of your Peugeot Expert Tepee. Dependant on your vehicle features and the year of your model, you will also be able to find staples, to achieve this, you will just have to use a staple extractor or to do it carefully with a big flat screwdriver, and use a lever to open the staple.
  • Then you will have to unscrew the screws that is from behind your mudguard and that locks the front bumper of your Peugeot Expert Tepee on the sides.
  • Unscrew the screws or remove the clips on the upper part of the bumper in the engine bay.
  • Now it’s time to go underneath your Peugeot Expert Tepee to unscrew the bolts that are on the chassis of the vehicle, you will find some in the middle of the bumper and on the sides.
  • Remember to unplug the connection of the plate lighting and the distance control sensor if you have it.
  • Carefully remove the front bumper by first unclipping the sides. If it doesn’t come off, you probably forgot a screw or a clip. Think of employing a carpet or other to avoid that it gets scratched by touching the ground.

That’s it, you’ve seen all the steps of how to remove the front bumper from your Peugeot Expert Tepee, to put it back in place adhere to the steps in the opposite direction.

How to remove the rear bumper from a Peugeot Expert Tepee

And to conclude, whether or not the operation is quite similar, we will look at the case of removing the rear bumper from your Peugeot Expert Tepee. For each stage to avoid repeating ourselves we will simply give you the broad outlines, refer to part 1 if you have any uncertainties or questions for more info.

  • Start with undertaking the same first stage, that is, lift your Peugeot Expert Tepee and remove your rear wheels in order to have an ideal working area to remove the bumper of your Peugeot Expert Tepee without trouble
  • Remove the rear wheel arches of your Peugeot Expert Tepee to access the side bumper side brackets
  • Open your trunk
  • Take out the side brackets in your wheel arches to make it more convenient to remove the bumper from your Peugeot Expert Tepee.
  • Remove the lower bindings below your Peugeot Expert Tepee.
  • Simultaneously, make sure un plug the rear license plate light and the reverse radar sensors if you are equipped with them.
  • Unscrew the top brackets from the top of the trunk.
  • Now all you have to do is remove the rear bumper from your Peugeot Expert Tepee, adhere to the same method as for the front bumper

Here, you have learned through these two parts, how to remove the bumper from a Peugeot Expert Tepee whether it is the front one or the rear one the methods are more or less the same and it is enough to be careful to make everything go well.

If you need more tutorials on the Peugeot Expert Tepee, go to our Peugeot Expert Tepee category.