If you’re a bit of a handy person, you’re most likely keen to take care of almost all of the work to be achieved on your Peugeot 406, but some are more challenging than others and necessitate the removal of body parts or components to access the component you want to operate on. We would like to help you in this process. That’s why in this article we are going to view how to remove the bumper from a Peugeot 406. This task is not very challenging and you should be able to do it with few tools. To do so , first we will see how to remove the front bumper of your Peugeot 406, then how to remove the rear bumper of this one.

remove-bumper-peugeot-406

How to remove the front bumper from a Peugeot 406

So let’s commence our article with the front bumper of your Peugeot 406. To take it off, you will just require a set of ratchet wrenches, some screwdrivers and torx bits. Here are the simple steps you will have to follow in order to disassemble the bumper of your Peugeot 406 in good conditions:

  • If you want to be more comfortable, we encourage you to put your Peugeot 406 on stands and to remove the front wheels to have a good access to the whole front bumper.
  • Open the bonnet of your automobile: Would seem evident, but you will need to have access to the bumper attachment in your engine compartment.
  • Remove the wheel arches: They’re also known as fenders, but they’ll get in the way and stop you from accessing all the screws on the front bumper of your Peugeot 406. Depending on your vehicle features and the year of your model, you will also be able to find staples, to do this, you will just have to use a staple extractor or to do it carefully with a big flat screwdriver, and use a lever to open the staple.
  • Then you will have to unscrew the screws that is at the rear of your mudguard and that locks the front bumper of your Peugeot 406 on the sides.
  • Unscrew the screws or remove the clips on the upper part of the bumper in the engine bay.
  • Now it’s time to go beneath your Peugeot 406 to unscrew the bolts that are on the chassis of the vehicle, you will find some in the middle of the bumper and on the sides.
  • Remember to disconnect the connection of the plate lighting and the distance control sensor if you have it.
  • Carefully remove the front bumper by first unclipping the sides. If it doesn’t come off, you almost certainly forgot a screw or a clip. Think of employing a carpet or other to prevent that it gets scratched by touching the ground.

That’s it, you’ve seen all the steps of how to remove the front bumper from your Peugeot 406, to reassemble it follow the steps in the opposite way.

How to remove the rear bumper from a Peugeot 406

And now, regardless if the process is quite equivalent, we will check out the case of removing the rear bumper from your Peugeot 406. For each step to avoid repeating ourselves we will simply give you the broad highlights, read the part 1 if you have any concerns or questions for more info.

  • Start with executing the same first step, that is, lift your Peugeot 406 and take off your rear wheels in order to have an ideal working space to remove the bumper of your Peugeot 406 serenely
  • Remove the rear wheel arches of your Peugeot 406 to access the side bumper side brackets
  • Open your trunk
  • Remove the side brackets in your wheel arches to make it less difficult to remove the bumper from your Peugeot 406.
  • Take off the lower bindings underneath your Peugeot 406.
  • At the same time, make sure disconnect the rear license plate light and the reverse radar sensors if you are equipped with them.
  • Unscrew the top brackets from the top of the trunk.
  • Now all you have to do is remove the rear bumper from your Peugeot 406, follow the same operation as for the front bumper

Here, you have discoverd through these two parts, how to remove the bumper from a Peugeot 406 whether it is the front one or the rear one the solutions are essentially the same and it is enough to be careful to make everything go well.

To discover more tips on the Peugeot 406, take a look at the Peugeot 406 category.