If you’re a bit of a handy person, you’re quite likely wanting to manage almost all of the work to be completed on your Peugeot 307, but some are more difficult than others and require the removal of body parts or elements to access the component you want to focus on. We really want to help you in this operation. That’s why in this article we are going to view how to remove the bumper from a Peugeot 307. This procedure is not very difficult and you should have the ability to do it with few tools. For that, first we will discover how to remove the front bumper of your Peugeot 307, then how to remove the rear bumper of this one.
How to remove the front bumper from a Peugeot 307
So let’s begin our content with the front bumper of your Peugeot 307. To remove it, you will just require a set of ratchet wrenches, some screwdrivers and torx bits. Here are the guidelines you will have to adhere to to be able to disassemble the bumper of your Peugeot 307 in good conditions:
- If you want to be more comfortable, we advise you to lift your Peugeot 307 and to remove the front wheels to have a perfect access to the whole front bumper.
- Open the bonnet of your car: Seems evident, but you will need to have access to the bumper attachment in your engine compartment.
- Remove the wheel arches: They’re also called fenders, but they’ll get in the way and prevent you from accessing all the screws on the front bumper of your Peugeot 307. Depending on your motor vehicle features and the year of your model, you will also have the ability to find staples, to achieve this, you will just have to use a staple extractor or to do it carefully with a big flat screwdriver, and use a lever to open the staple.
- Then you will have to unscrew the screws that is from behind your mudguard and that seals the front bumper of your Peugeot 307 on the sides.
- Unscrew the screws or remove the clips on the upper part of the bumper in the engine bay.
- Now it’s time to go below your Peugeot 307 to unscrew the bolts that are on the chassis of the motor vehicle, you will find some in the middle of the bumper and on the sides.
- Be sure you unplug the connection of the plate lighting and the distance control sensor if you have it.
- Carefully remove the front bumper by first unclipping the sides. If it doesn’t come off, you probably forgot a screw or a clip. Think of employing a carpet or other to prevent that it gets scratched by touching the ground.
That’s it, you’ve seen all the steps of how to remove the front bumper from your Peugeot 307, to reassemble it adhere to the steps in the opposite way.
How to remove the rear bumper from a Peugeot 307
And now, regardless if the procedure is quite equivalent, we will look at the case of removing the rear bumper from your Peugeot 307. For each step to avoid repeating ourselves we will simply give you the broad outlines, refer to part 1 if you have any uncertainties or questions for more information.
- Start with executing the same first step, that is, lift your Peugeot 307 and take out your rear wheels to be able to have an optimal working area to remove the bumper of your Peugeot 307 serenely
- Remove the rear wheel arches of your Peugeot 307 to access the side bumper side brackets
- Open your trunk
- Remove the side brackets in your wheel arches to make it much easier to remove the bumper from your Peugeot 307.
- Take off the lower bindings underneath your Peugeot 307.
- While doing so, be sure you disconnect the rear license plate light and the reverse radar sensors if you are equipped with them.
- Unscrew the top brackets from the top of the trunk.
- Now all you have to do is remove the rear bumper from your Peugeot 307, adhere to the same method as for the front bumper
Here, you have discoverd through these two parts, how to remove the bumper from a Peugeot 307 whether it is the front one or the rear one the techniques are pretty much the same and it is enough to be careful to make everything go well.
Whenever you have any further questions about the Peugeot 307, do not hesitate to consult our Peugeot 307 category.
