If you’re a bit of a handy person, you’re probably willing to look after most of the maintenance to be carried out on your Peugeot 306, but some are more complicated than others and require the removal of body parts or components to access the part you want to work on. We really want to help you in this process. That’s why on this web page we are going to view how to remove the bumper from a Peugeot 306. This process is not very complicated and you should have the ability to do it with few tools. To accomplish this, first we will discover how to remove the front bumper of your Peugeot 306, then how to remove the rear bumper of this one.
How to remove the front bumper from a Peugeot 306
So let’s commence our content page with the front bumper of your Peugeot 306. To remove it, you will just need a set of ratchet wrenches, some screwdrivers and torx bits. Here are the simple steps you will have to adhere to in order to disassemble the bumper of your Peugeot 306 in good conditions:
- If you want to be more comfy, we encourage you to put your Peugeot 306 on stands and to remove the front wheels to have a good access to the whole front bumper.
- Open the bonnet of your car: Seems obvious, but you will need to have access to the bumper attachment in your engine compartment.
- Take off the wheel arches: They’re also described as fenders, but they’ll get in the way and prevent you from accessing all the screws on the front bumper of your Peugeot 306. Depending on your vehicle features and the year of your model, you will also be able to find staples, to get this done, you will just have to use a staple extractor or to do it gently with a big flat screwdriver, and use a lever to open the staple.
- Then you will have to unscrew the screws that is at the rear of your mudguard and that fastens the front bumper of your Peugeot 306 on the sides.
- Unscrew the screws or remove the clips on the upper part of the bumper in the engine bay.
- Now it’s time to go below your Peugeot 306 to unscrew the bolts that are on the chassis of the vehicle, you will find some in the middle of the bumper and on the sides.
- Be sure you unplug the connection of the plate lighting and the distance control sensor if you have it.
- Carefully remove the front bumper by first unclipping the sides. If it doesn’t come off, you perhaps forgot a screw or a clip. Think of employing a carpet or other to prevent that it gets scratched by touching the ground.
That’s it, you’ve seen all the steps of how to remove the front bumper from your Peugeot 306, to put it back in place adhere to the steps in the opposite direction.
How to remove the rear bumper from a Peugeot 306
And to conclude, whether or not the procedure is quite identical, we will check out the case of removing the rear bumper from your Peugeot 306. For each step to avoid repeating ourselves we will only give you the broad highlights, refer to part 1 if you have any concerns or questions for more details.
- Start with undertaking the same first step, that is, lift your Peugeot 306 and take out your rear wheels in order to have an optimal working space to remove the bumper of your Peugeot 306 serenely
- Remove the rear wheel arches of your Peugeot 306 to access the side bumper side brackets
- Open your trunk
- Take off the side brackets in your wheel arches to make it much easier to remove the bumper from your Peugeot 306.
- Remove the lower bindings underneath your Peugeot 306.
- Simultaneously, make sure disconnect the rear license plate light and the reverse radar sensors if you are equipped with them.
- Unscrew the top brackets from the top of the trunk.
- Now all you have to do is remove the rear bumper from your Peugeot 306, adhere to the same method as for the front bumper
Here, you have learned through these two parts, how to remove the bumper from a Peugeot 306 whether it is the front one or the rear one the solutions are just about the same and it is enough to be careful to make everything go well.
If you want more guides on the Peugeot 306, go to our Peugeot 306 category.
