If you’re a bit of a do-it-yourselfer, you’re quite likely willing to handle the majority of the service to be done on your Peugeot 108, but some are more challenging than others and need the removal of body parts or components to access the part you want to focus on. We really want to help you in this task. That’s why on this web page we are going to view how to remove the bumper from a Peugeot 108. This procedure is not very challenging and you should be able to do it with few equipment. To do so , first we will see how to remove the front bumper of your Peugeot 108, then how to remove the rear bumper of this one.
How to remove the front bumper from a Peugeot 108
So let’s start our content with the front bumper of your Peugeot 108. To remove it, you will just need a set of ratchet wrenches, some screwdrivers and torx bits. Here are the guidelines you will have to follow in order to disassemble the bumper of your Peugeot 108 in good conditions:
- If you want to be more comfortable, we advise you to put your Peugeot 108 on stands and to remove the front wheels to have a best access to the whole front bumper.
- Open the bonnet of your motor vehicle: Seems evident, but you will need to have access to the bumper attachment in your engine compartment.
- Take away the wheel arches: They’re also called fenders, but they’ll get in the way and stop you from accessing all the screws on the front bumper of your Peugeot 108. Depending on your vehicle features and the year of your model, you will also be able to find staples, to achieve this, you will just have to use a staple extractor or to do it gently with a big flat screwdriver, and use a lever to open the staple.
- Then you will have to unscrew the screws that is at the rear of your mudguard and that seals the front bumper of your Peugeot 108 on the sides.
- Unscrew the screws or remove the clips on the upper part of the bumper in the engine bay.
- Now it’s time to go beneath your Peugeot 108 to unscrew the bolts that are on the chassis of the vehicle, you will find some in the middle of the bumper and on the sides.
- Make sure unplug the connection of the plate lighting and the distance control sensor if you have it.
- Carefully remove the front bumper by first unclipping the sides. If it doesn’t come off, you quite likely forgot a screw or a clip. Think of employing a carpet or other to prevent that it gets scratched by touching the ground.
That’s it, you’ve seen all the steps of how to remove the front bumper from your Peugeot 108, to reassemble it follow the steps in the opposite direction.
How to remove the rear bumper from a Peugeot 108
And to finish, whether or not the procedure is quite equivalent, we will look at the case of removing the rear bumper from your Peugeot 108. For each step to avoid repeating ourselves we will exclusively give you the broad outlines, refer to part 1 if you have any concerns or questions for more details.
- Start by performing the same first step, that is, lift your Peugeot 108 and remove your rear wheels in order to have an ideal working area to remove the bumper of your Peugeot 108 serenely
- Remove the rear wheel arches of your Peugeot 108 to access the side bumper side brackets
- Open your trunk
- Take away the side brackets in your wheel arches to make it less complicated to remove the bumper from your Peugeot 108.
- Take away the lower bindings below your Peugeot 108.
- At the same time, make sure to disconnect the rear license plate light and the reverse radar sensors if you are equipped with them.
- Unscrew the top brackets from the top of the trunk.
- Now all you have to do is remove the rear bumper from your Peugeot 108, follow the same procedure as for the front bumper
Here, you have seen through these two parts, how to remove the bumper from a Peugeot 108 whether it is the front one or the rear one the solutions are almost the same and it is enough to be meticulous to make everything go well.
To get more tips on the Peugeot 108, take a look at the Peugeot 108 category.
