If you’re a bit of a handy person, you’re likely willing to manage most of the work to be achieved on your Nissan Versa, but some are more complex than others and necessitate the removal of body parts or parts to access the component you want to focus on. We would really like to help you in this operation. That’s why on this web page we are going to view how to remove the bumper from a Nissan Versa. This procedure is not very complex and you should have the ability to do it with few tools. For that, first we will see how to remove the front bumper of your Nissan Versa, then how to remove the rear bumper of this one.
How to remove the front bumper from a Nissan Versa
So let’s begin our content with the front bumper of your Nissan Versa. To take it off, you will just need a set of ratchet wrenches, some screwdrivers and torx bits. Here are the simple steps you will have to stick to in order to disassemble the bumper of your Nissan Versa in good conditions:
- If you want to be more relaxed, we encourage you to lift your Nissan Versa and to remove the front wheels to have a good access to the whole front bumper.
- Open the bonnet of your automobile: Seems obvious, but you will need to have access to the bumper attachment in your engine compartment.
- Take away the wheel arches: They’re also named fenders, but they’ll get in the way and stop you from accessing all the screws on the front bumper of your Nissan Versa. Depending on your car features and the year of your model, you will also be able to find staples, to achieve this, you will just have to use a staple extractor or to do it carefully with a big flat screwdriver, and use a lever to open the staple.
- Then you will have to unscrew the screws that is in back of your mudguard and that locks the front bumper of your Nissan Versa on the sides.
- Unscrew the screws or remove the clips on the upper part of the bumper in the engine bay.
- Now it’s time to go under your Nissan Versa to unscrew the bolts that are on the chassis of the car, you will find some in the middle of the bumper and on the sides.
- Make sure disconnect the connection of the plate lighting and the distance control sensor if you have it.
- Carefully remove the front bumper by first unclipping the sides. If it doesn’t come off, you perhaps forgot a screw or a clip. Think of using a carpet or other to prevent that it gets scratched by touching the ground.
That’s it, you’ve seen all the steps of how to remove the front bumper from your Nissan Versa, to reassemble it stick to the steps in the opposite way.
How to remove the rear bumper from a Nissan Versa
And to conclude, regardless if the operation is quite identical, we will look at the case of removing the rear bumper from your Nissan Versa. For each stage to avoid repeating ourselves we will exclusively give you the broad highlights, refer to part 1 if you have any doubts or questions for more info.
- Start with executing the same first stage, that is, lift your Nissan Versa and take out your rear wheels in order to have an ideal working space to remove the bumper of your Nissan Versa serenely
- Remove the rear wheel arches of your Nissan Versa to access the side bumper side brackets
- Open your trunk
- Take away the side brackets in your wheel arches to make it more convenient to remove the bumper from your Nissan Versa.
- Take off the lower bindings underneath your Nissan Versa.
- At the same time, be sure you un plug the rear license plate light and the reverse radar sensors if you are equipped with them.
- Unscrew the top brackets from the top of the trunk.
- Now all you have to do is remove the rear bumper from your Nissan Versa, stick to the same process as for the front bumper
Here, you have seen through these two parts, how to remove the bumper from a Nissan Versa whether it is the front one or the rear one the solutions are practically the same and it is enough to be careful to make everything go well.
In the event that you have any further questions about the Nissan Versa, do not hesitate to consult our Nissan Versa category.
