If you’re a bit of a handy person, you’re most likely willing to take care of most of the service to be carried out on your Nissan NV, but some are more complicated than others and necessitate the removal of body parts or components to access the component you want to focus on. We would like to help you in this operation. That’s why in this article we are going to find out how to remove the bumper from a Nissan NV. This procedure is not very complicated and you should be able to do it with few equipment. For that, first we will see how to remove the front bumper of your Nissan NV, then how to remove the rear bumper of this one.
How to remove the front bumper from a Nissan NV
So let’s commence our content with the front bumper of your Nissan NV. To take it off, you will just require a set of ratchet wrenches, some screwdrivers and torx bits. Here are the guidelines you will have to follow in order to disassemble the bumper of your Nissan NV in good conditions:
- If you want to be more comfortable, we suggest you to lift your Nissan NV and to remove the front wheels to have a perfect access to the whole front bumper.
- Open the bonnet of your car: Would seem obvious, but you will need to have access to the bumper attachment in your engine compartment.
- Take away the wheel arches: They’re also described as fenders, but they’ll get in the way and stop you from accessing all the screws on the front bumper of your Nissan NV. According to your automobile features and the year of your model, you will also have the ability to find staples, to achieve this, you will just have to use a staple extractor or to do it carefully with a big flat screwdriver, and use a lever to open the staple.
- Then you will have to unscrew the screws that is from behind your mudguard and that fastens the front bumper of your Nissan NV on the sides.
- Unscrew the screws or remove the clips on the upper part of the bumper in the engine bay.
- Now it’s time to go below your Nissan NV to unscrew the bolts that are on the chassis of the automobile, you will find some in the middle of the bumper and on the sides.
- Remember to unplug the connection of the plate lighting and the distance control sensor if you have it.
- Carefully remove the front bumper by first unclipping the sides. If it doesn’t come off, you probably forgot a screw or a clip. Think of employing a carpet or other to prevent that it gets scratched by touching the ground.
That’s it, you’ve seen all the steps of how to remove the front bumper from your Nissan NV, to put it back in place follow the steps in the opposite way.
How to remove the rear bumper from a Nissan NV
And to finish, regardless if the operation is quite equivalent, we will look at the case of removing the rear bumper from your Nissan NV. For each step to avoid repeating ourselves we will exclusively give you the broad outlines, read the part 1 if you have any doubts or questions for more details.
- Start with performing the same first step, that is, lift your Nissan NV and remove your rear wheels in order to have an ideal working area to remove the bumper of your Nissan NV without trouble
- Remove the rear wheel arches of your Nissan NV to access the side bumper side brackets
- Open your trunk
- Take away the side brackets in your wheel arches to make it much easier to remove the bumper from your Nissan NV.
- Take off the lower bindings below your Nissan NV.
- While doing so, make sure to disconnect the rear license plate light and the reverse radar sensors if you are equipped with them.
- Unscrew the top brackets from the top of the trunk.
- Now all you have to do is remove the rear bumper from your Nissan NV, follow the same technique as for the front bumper
Here, you have learned through these two parts, how to remove the bumper from a Nissan NV whether it is the front one or the rear one the solutions are essentially the same and it is enough to be meticulous to make everything go well.
To get more tips on the Nissan NV, take a look at the Nissan NV category.
