If you’re a bit of a handy person, you’re probably eager to manage the majority of the work to be done on your Mercury Mariner, but some are more complicated than others and need the removal of body parts or components to access the component you want to work on. We want to help you in this task. That’s why on this web page we are going to see how to remove the bumper from a Mercury Mariner. This procedure is not very complicated and you should have the ability to do it with few tools. For that, first we will discover how to remove the front bumper of your Mercury Mariner, then how to remove the rear bumper of this one.
How to remove the front bumper from a Mercury Mariner
So let’s begin our article with the front bumper of your Mercury Mariner. To take it off, you will just need a set of ratchet wrenches, some screwdrivers and torx bits. Here are the guidelines you will have to stick to to be able to disassemble the bumper of your Mercury Mariner in good conditions:
- If you want to be more comfortable, we encourage you to put your Mercury Mariner on stands and to remove the front wheels to have a good access to the whole front bumper.
- Open the bonnet of your motor vehicle: Would seem evident, but you will need to have access to the bumper attachment in your engine compartment.
- Remove the wheel arches: They’re also referred to as fenders, but they’ll get in the way and stop you from accessing all the screws on the front bumper of your Mercury Mariner. Dependant on your car features and the year of your model, you will also have the ability to find staples, to do this, you will just have to use a staple extractor or to do it gently with a big flat screwdriver, and use a lever to open the staple.
- Then you will have to unscrew the screws that is in back of your mudguard and that locks the front bumper of your Mercury Mariner on the sides.
- Unscrew the screws or remove the clips on the upper part of the bumper in the engine compartment.
- Now it’s time to go underneath your Mercury Mariner to unscrew the bolts that are on the chassis of the car, you will find some in the middle of the bumper and on the sides.
- Make sure disconnect the connection of the plate lighting and the distance control sensor if you have it.
- Carefully remove the front bumper by first unclipping the sides. If it doesn’t come off, you probably forgot a screw or a clip. Think of working with a carpet or other to avoid that it gets scratched by touching the ground.
That’s it, you’ve seen all the steps of how to remove the front bumper from your Mercury Mariner, to put it back in place stick to the steps in the opposite direction.
How to remove the rear bumper from a Mercury Mariner
And to conclude, regardless if the process is quite equivalent, we will check out the case of removing the rear bumper from your Mercury Mariner. For each stage to avoid repeating ourselves we will just give you the broad highlights, refer to part 1 if you have any uncertainties or questions for more info.
- Start by executing the same first stage, that is, lift your Mercury Mariner and take out your rear wheels to be able to have an optimal working space to remove the bumper of your Mercury Mariner without trouble
- Remove the rear wheel arches of your Mercury Mariner to access the side bumper side brackets
- Open your trunk
- Remove the side brackets in your wheel arches to make it less complicated to remove the bumper from your Mercury Mariner.
- Remove the lower bindings below your Mercury Mariner.
- While doing so, remember to un plug the rear license plate light and the reverse radar sensors if you are equipped with them.
- Unscrew the top brackets from the top of the trunk.
- Now all you have to do is remove the rear bumper from your Mercury Mariner, stick to the same operation as for the front bumper
Here, you have discoverd through these two parts, how to remove the bumper from a Mercury Mariner whether it is the front one or the rear one the methods are practically the same and it is enough to be careful to make everything go well.
To get more tips on the Mercury Mariner, take a look at the Mercury Mariner category.
